SHDN-160-10.0M2
2mm
3.8mm to 4.2mm
Conduct, Insulation and Mat
Copper Nickel Alloy
Senphus
Spool, Carton
CE, SAA
Jiangsu, China (Mainland)
85168000
Product Description
Underfloor Heating Mat of VDE and UL Approved
Senphus Underfloor heating mats are usually installed under tile and laminate for room heat etc.
Features
1.CE,SAA certificate
2.the heating wire on the fiber glass mats
3.the mats width0.3m, 0.5m
4.the voltage 12V to 240V, can be done with transformer
5.the power from 100w to 200w/square meter,you can choose 130w/square meter or 170w/square meter as you like
6.the length of mats from 1 mto 30m
Underfloor Heating Mat Specification
| SH PCN | Type | Rated power | Resistance @20 o C+10/-5% | Mat size | Length |
| W | Ω | m | m | ||
| SHDN00075 | SHDN-160-1.0M2 | 160 | 302.5 | 0.5X2.0 | 11.1 |
| SHDN00076 | SHDN-160-1.5M2 | 240 | 201.7 | 0.5X3.0 | 16.65 |
| SHDN00077 | SHDN-160-2.0M2 | 320 | 151.3 | 0.5X4.0 | 22.2 |
| SHDN00078 | SHDN-160-2.5M2 | 400 | 121 | 0.5X5.0 | 27.75 |
| SHDN00079 | SHDN-160-3.0M2 | 480 | 100.8 | 0.5X6.0 | 33.3 |
| SHDN00080 | SHDN-160-3.5M2 | 560 | 86.4 | 0.5X7.0 | 38.85 |
| SHDN00081 | SHDN-160-4.0M2 | 640 | 75.6 | 0.5X8.0 | 44.4 |
| SHDN00082 | SHDN-160-4.5M2 | 720 | 67.2 | 0.5X9.0 | 49.95 |
| SHDN00083 | SHDN-160-5.0M2 | 800 | 60.5 | 0.5X10.0 | 55.5 |
| SHDN00084 | SHDN-160-6.0M2 | 960 | 50.4 | 0.5X12.0 | 66.6 |
| SHDN00085 | SHDN-160-7.0M2 | 1120 | 43.2 | 0.5X14.0 | 77.7 |
| SHDN00086 | SHDN-160-8.0M2 | 1280 | 37.8 | 0.5X16.0 | 88.8 |
| SHDN00087 | SHDN-160-9.0M2 | 1440 | 33.6 | 0.5X18.0 | 99.9 |
| SHDN00088 | SHDN-160-10.0M2 | 1600 | 30.3 | 0.5X20.0 | 111 |
| SHDN00099 | SHDN-160-12.0M2 | 1920 | 25.2 | 0.5X24.0 | 133.2 |
Advantages of Senphus Underfloor Heating Mat
· Provides invisible comfort and safety.
· Can be placed directly underneath any floor covering, from tiles to wood or laminate.
· Is Ideal for larger floor areas.
· Offers ultimate flexibility; tight corners or add shaped rooms are no problem at all.
· Ideal for renovation projects as it can be laid directly on top of existing floor coverings, with no need to dig up the floor.
· Less air movement means less dust.
· Ideal for new builds.
· Easy to plan and install.
Installation of electric underfloor heating under tiles
Laying the insulation(1) The insulation for under tiles always comes in the form insulation board. This board needs to fixed to a clean subfloor with a suitable flexible tile adhesive. The normal method of applying tiles adhesive is to use a trowel with ridges to get a flat surface.
(2) Once all the insulation has been fixed then perform a full electrical test on all the electric underfloor heating mats.
(3) Next is to roll out and fix the electric under floor matting onto the floor according to your floor plan. Make sure you always buy from a company that will provide a full floor plan to avoid any problems. Rayotec provides free floor plans with all purchases.
(4) Fully test all the mats again.
(5) Install your thermostat.
(6) Lay your tiles/stone floor onto using a flexible tile adhesive.
