TR131
9002-88-4
[C2h4]N
618-339-3
Carbon Chain Polymer
White
LOTRENE
Bag
25kg/bag
Qatar
3915100000
Product Description
| Nominal physical properties | ASTM | Unit | value |
| density | D792 | g/cm³ | 0.938 |
| Melt Index,Condotion 190ºC/2.16kg | D1238 | g/10min | 0.2 |
| HLMI, Condition 190ºC/21.6kgs | D1238 | g/10min | 15 |
| Flexural Modulus,Tangent | D790 | MPa | 760 |
| Brittleness Temperature | D746 | ºC | <-75 |
| Typical Film Properties** Drat Drop(66cm) | D1709 | g | 165 |
| Spencer Impact Strength | D3420 | J | 0.35 |
| Tensile Yield Strength,50mm/min | D882 | MPa | MD:21 |
| TD:23 | |||
| Elongation at Break,50 mm/min | D883 | % | MD:500 |
| TD:600 | |||
| Elmendorf Tear Strength | D1922 | g | MD:30 |
| TD:350 |
Main applications:
1 Injection moulded products: crates, bottle caps, buckets, lids, food containers, trays, boxes, cases and plastic flowers.
2 Blow-moulded products: hollow-moulded products, such as various series of blow-moulded barrels, containers, bottles, holding detergents, chemicals, cosmetics, etc., gasoline drums, daily necessities, etc.. There are also blown film products, such as food packaging bags, grocery shopping bags, fertiliser lining film.
3 Extruded plastic products: pipes and fittings are mainly used for gas transmission, public water and chemical transmission, such as building materials, drainpipes, gas pipes, hot water pipes, etc.: plates are mainly used for seating, suitcases, handling containers and so on.
4 Rotomoulding: injection-moulded products, such as large containers, tanks, barrels and boxes.
5 Polyethylene can be processed into films, wire and cable sheathing, pipes, various hollow products, injection moulded products, fibres, etc.. Widely used in agriculture, packaging, electrical and electronic, machinery, automotive, daily necessities and other fields.
