Like ABS Resin PRO2
Carbon Chain Polymer
KINGROON
Guangdong
3906909090
Product Description
Kingroon 3D Printing Resin-ABS-Like Resin
- Both Strength and Toughness with High Promotion: Compared to the excellent tensile and bending strength of the previous version of ABS-like resin + , Anycubic ABS-Like Resin Pro 2 has strengthened the performance of toughness, increases the elongation at break by more than 100%, and the finished model is much stronger, which can be used to print high-strength and high-toughness models such as structural parts, industrial prototype parts, and fixtures.
- Performance far Superior to ABS-Like Resin: Anycubic ABS-Like Resin Pro 2 is developed with a high elongation at break which can even reach to 35~40%. Compared to ABS-like resin +, it has increased by 114%.
- High Fluidity, High Success Rate: Low viscosity and high flowability shorten curing time and make models easier to form. Anycubic ABS-Like Resin Pro 2 enables fast reflow, reducing delamination in model print. At the same time, the backplane adhesion is better, effectively reducing the risk of printing failure.
- High Precision with Low Shrinkage: With an even lower shrinkage rate, the chance of distortion is decreased. Achieve top-notch precision and display sharp, vivid details in your prints.
- Low Odor for Pleasant Printing: Our low-odor formula reduces discomfort for those sensitive to smells, creating a more pleasant printing environment.
