DIAPHRAGM PROTECTOR 1:1 Piston
Protects measuring or recording device from working fluid while transmitting no-lag, linear pressure signal.Rugged workhorse sensor found in every corner of the world doing every conceivable pressure sensing job. Robust, time proven design allows easy field repair and maintenance.Available in flanged, threaded, and weld on female sub
configurations.
4:1 PRESSURE DEBOOSTER
The Debooster is a stepped piston device which reduces the line pressure by a ratio of 4:1. System Pressure Gauges and Recorders are therefore calibrated at ¼ the line pressure. The Debooster external configurations are based on 2" Buttweld Sub and Wing Nut Unions.The Debooster Cylinder replaces the Union Male Sub. The Union Wing Nut is used; the buttweld Female Sub is optionally available.A fluid Separator replaces the Union Seal Ring.
DIAPHRAGM PROTECTOR 1:1 Piston
Standard Capacities include: 3,000, 5,000, 6,000, 10,000, and 15,000 psi, (210, 350, 420, 700, and 1,000 kg/cm 2), 10K, 21K, 42K, 70K, 80K, (21, 35, 42, 70, 100 MPa).
4:1 PRESSURE DEBOOSTER:
| Working Pressure: | 15,000 PSI / 1,000 Kg/Sq Cm / 100 Mpa |
| Accuracy: Debooster | ±0.5% FSV, system ±2.0% FSV |
| Pressure Reduction Ratio: | 4.07:1 |
| Separator Diaphragm: | Viton |
| Maximum Hose Length | 100 ft/30 M |
| Recommended Hose: | SAE 100R2 Type A or Type B, SAE 100R10 or SAE 100R11 |
| Operating Temperature: | -37 to 65ºC (-35 yo 150ºF) |
TONG TORQUE AND TONG LINE PULL INDICATION SYSTEMS
PUMP STROKE COUNTER/RATE METER
WEIGHT INDICATOR AND DEADLINE ANCHOR
