Sludge vacuum pump is a type of high load and strong suction capacity vacuum transferring pump, it is also called solids transferring pump or cuttings transfer pump. The unique structure design enables it work in the very tough circumstance with less maintenance. It is ideal equipment for transferring sludge with high solid content up to 80% and high specific gravity material. Vacuum pump has below features: high efficiency Venturi device can produce a vacuum up to 8 meters water column for material suction under high air flow circumstance. It is designed with compact structure, almost no wearing parts, for high density material transferring like cuttings and oily sludge etc.
| Model | JXSP-40A | JXSP-20A | JXSP-10A |
| Max Capacity(m³/h) | 40m³/h | 20m³/h | 10m³/h |
| Inlet/Outlet Size(Inch) | 4" | 3" | |
| Vacuum Degree | 25"HG (Mercury Column) | 85Kpa/25 inch HG(Mercury Column) | |
| Max Suction Distance(m) | 50m | ||
| Max Discharge Distance(m) | 1000m | 500m | |
| Max Solids Content | 80% | ||
| Max Solids Size(mm) | 75mm | 50mm | |
| Pressure Request | 550Kpa-785Kpa (80-114PSI) | 550Kpa-690Kpa (80-100PSI) | |
| Air Demand | 17m³/min (600CFM) | 8m³/min(280CFM) | 4.3 m³/min(150CFM) |
| Weight(kg) | 875kg | 320kg | 290kg |
| Dimension:L×W×H(mm) | 1690×1400×1989mm | 1357×916×1253mm | 1317×806×1273mm |
1. It should be placed in a warehouse with good ventilation and a relative moisture no more than 90% (at 25ºC) and temperature not higher than +55ºC and not lower than -25ºC.
2.The surrounding environment of storage should not contain strong corrosive gases that may destroy the metal or its insulation.
3.When long-time storage is required, the parts or components likely to be rusted shall be coated with grease or paint for protection.
