ET-PAUHF500W
Power Amplifier
Wireless
Standard
Without Lightning Protection
ISO, RoHS
New
2/5/10/20/40/50/100/200/500 Watts
40- 60dB or Customized
>30/1dB Step or Customized
SMA-50K/N(F) or Other Customized
2(Max)
50
20%-50%
RS485 or RS232 or RJ45 or Other Customized
1.5:1
<10dBm
ETENDA
Carton/Wooden Case Packing
2/5/10/20/40/50/100/200/500 watts
Shenzhen
Product Description
jammer power amplifier 430Mhz 200w rf amplifier
All the parameters of PA can be customized depend on your request, if you have any customized parameters pls contact us freely
Technical Specifications
All the parameters of PA can be customized depend on your request, if you have any customized parameters pls contact us freely
Technical Specifications
| Frequency(MHz) | 400-440 or Customized |
| Output Power(W) | 100W |
| Input Power | ≤10dBm |
| ALC Range(dB) | ≥20 |
| Gain(dB) | 50 or Customized |
| Gain Adjustment range(dB) | >31/1dB step or Customized |
| Gain Adjustment Linearity(dB) | ≤±1 |
| Gain Flatness(dB) | ±1(Max) |
| Impedance(ohm) | 50 |
| Input/output VSWR | 1.5:1 |
| Noise Figure | 6dB |
| Harmonic Suppression | >-20dBc |
| Spurious emission | -60dBc |
| Voltage(V) | DC28 |
| Efficiency | 25-40% |
| Power supply Interface | Pull-core capacitance |
| Monitor interface | RS-485 or RS232 or RJ45 or other Customized |
| Monitoring communication protocols | Use Manufacturers protocol or Customized |
| Working Temperature | -40~+65 degree |
| Storage Temperature | -55 to +85 degree |
| Operating Humidity | 0 to 90%, relative |
| Function | Enable,over temperature protection,over VSWR protection,forward power/reverse power detection, open circuit protection etc |
