ET-PAGP50W
Signal Amplification
Wireless
GPS L1 L2 2.4G 5.8g 900MHz
Data
ISO, RoHS
New
2/5/10/20/40/50/100 Watts
40- 50dB or Customized
>30/1dB Step or Customized
SMA-50K or Other Customized
1(Max)
50
30%
RS-485 or RS232 or Other Customized
1.5:1
<20dBm
ETENDA
Carton Packing
2/5/10/20/40/50/100 watts
Shenzhen
Product Description
1550-1650MHz GPS Power Amplifier for UAV drone jammer
All the parameters of PA can be customized depend on your request, if you have any customized parameters pls contact us freely
Technical Specifications
All the parameters of PA can be customized depend on your request, if you have any customized parameters pls contact us freely
Technical Specifications
| Frequency(MHz) | 1550-1650Mhz or Customized |
| Input Power(dBm) | ≤0-20dBm or Customized |
| Output Power(dBm) | 47±1(50W ) or lower |
| Gain(dB) | 50dB or less |
| Inband Ripple(dB) | ≤±1.5 or less |
| ALC Range(dB) | ≥5 |
| Gain flatness | ≤3dB |
| Input/Output VSWR | ≤1.5:1 |
| Impedance(ohm) | 50 |
| Voltage(V) | DC+28 |
| Working current | <10-16A |
| Efficiency | ≥20%-40% or Customized |
| Spurious | >60dBc |
| IMD3(dBc)(optional) | -36,-40,-45dbc |
| RF In/Out Connector | SMA-Female |
| Monitor interface | RS-485 or RS232 or other Customized |
| Working Temperature | -25~+65 degree |
| Storage Temperature | -40 to +85 degree |
| Operating Humidity | 0 to 90%, relative |
| Weight | ≤1.5KG |
| Protection | High temperature,High VSWR,Open circuit or customized |
| Monitoring | Forward power,Reverse power,VSWR,Temperature,Enable |
| Cooling | External Heat sink |
