JHSW-8602
Green
Liquid
Spray
ISO14001, RoHS, ISO9001
Film Forming Matter
Conversion Type
polysv
200L Drum
A side 220 kg, B side 200 kg
Qingdao, China
Product Description
JHSW8602 Helmet and Chest Armor Protective Polyurea is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic polyurea elastomer.JHSW8602 is used by itself or in combination with other materials to produce protective coatings, anti collision liners, reinforcing layer, and resilient surface on rubber and other substrates. Advantages:
- Anti- explosion, good Impact resistance
- Bondable and paintable to various kinds of substrates
- Fast cure, short down time, no sagging
- Excellent physical and and chemical resistant properties
- Not sensitive to the moisture, good thermal stability
- 100% Solids, No VOC's, Odorless, Non-toxic
- Seamless, flexible, slick and non-porous
JHSW8602 Helmet and Chest Armor Protective Polyurea has excellent anti-collision and anti-impact performance. It can be sprayed to helmet, chest armor, vehicles, safety house and other facilities.
Properties:
| Tensile Strength /MPa | ≥22 | Solids Content/% | 100 |
| Elongation/% | ≥450 | VOC | 0 |
| Tear Strength/( N/mm) | ≥85 | Gel Time/s | 8-12 |
| Shore Hardness | ≥90A | Tack Free/ s | 20~30 |
| Adhesion /(Pull off, concrete,MPa) | ≥2.5 | Shelf Life | 12 months, unopened at 0~40 ºC |
| Density/( g/cm3) | 0.95~1.05 | Flash Point/ ºC | >100 |
| Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g) | ≤0.04 | Mix Ratio V/V | 1: 1 |
| Impermeability(0.3MPa/30min) | Impervious | Recommended Spreading Thickness/mm | 2~3 |
| Chemical Resistance | No corrosion, No Blister, No Spalling | Colors: | Optional |
