DSP-1 was polymerized by solvent method through optimization of high-temperature monomer and salt-resistant monomer. Reasonable monomer space volume improves the steric resistance and molecular rigidity of the polymer. Therefore, DSP-1 overcomes the weakness of the conventional polymer filter reducer, such as poor shear performance, poor salt resistance and poor FLHTHP performance, and is a new polymer filter reducer with excellent performance. Suitable for high salinity salt water drilling fluid, deep well and ultra-deep well. The recommended dosage is 3.0-7.0 ppb.
Appearance: White or light yellow powderMoisture: ≤10.0%
Residue (0.90mm): ≤10.0%
pH: 7-10
FLHTHP in 30% NaCl mud after 200ºC/16h aging: ≤20.0 ml
Good compatibility.
Reduce FLHTHP effectively, improve mud cake quality.
Resist salt up to saturation, so it can be applied in freshwater, saltwater, saturated saltwater and seawater drilling and completion fluids.
Excellent high-temperature stability, Perform well up to 240ºC, can be used for deep and ultra-deep wells.
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.
| I . Filtration Reducer For WBM | |
| DSP-1 HTHP Polymer Filtration Reducer | |
| DSP-2 Polymer Filtration Reducer | |
| PAN-Trol Low Viscosity Copolymer Filtration Reducer | |
| PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
| SMP Sulfomethylated Phenolic Resin | |
| SMP-III Sulfomethylated Phenolic Resin | |
| SPNH Lignite Resin for Drilling Fluid | |
| LYS Modified Starch | |
| SHR-1 Modified Starch HT | |
| DACP Alkyl cellulose polysaccharide for drilling fluid | |
| II. Shale Inhibitor For WBM | |
| NP-1 Nano-polyester for Drilling Fluid | |
| NS-1 Nano-SiO2 | |
| FF-I Sulfonated Asphalt(High purity) | |
| FF-V Sulfonated Asphalt(Ecnomical) | |
| FF-III Emulsified Asphalt | |
| AP-1 Polyamine Shale Inhibitor | |
| POLYOL | |
| DLA-1 Aluminum Based Shale Inhibitor | |
| III. Lubricant For WBM | |
| HEP-1 EP Lubricant for High Density Mud | |
| EP-202 EP Lubricant for Drilling Fluid | |
| EP-204 Oil Base Lubricant for Drilling Fluid | |
| GR Solid Lubricant (Graphite base) | |
| IV. Thinner For WBM | |
| SF Silicon-fluorine Thinner | |
| DLST CF Chromium Free Lignosulfonate Thinner | |
| V. Lost Circulation Materials | |
| SDF3 Compounded LCM | |
| GWS-1 Delayed Expansion LCM | |
| HFD-1 Rapid Filtrating High Strength LCM | |
| VI. OBM Additives | |
| OME-1 Primary Emulsifier for OBM | |
| OME-2 Secondary Emulsifier for OBM | |
| OFC OBM Filtration Reducer | |
| OMP-1 Nano-Polymer Sealing Additive for OBM | |
| OMP-2 Expanded Graphite Plugging Agent for OBM | |
| VII.Defoamer For WBM | |
| Polyether Defoamer | |
| PD-100 Organosilicon Deformer | |
| VIII. Bactericide For WBM | |
| JM-1 Bactericide for Drilling Fluid | |
| IX. Filtration Reducer For Cementing | |
| DSPC-1 Filtration Reducer For Cementing | |
| DSPC-2 Filtration Reducer For Cementing | |
| X. Other Series | |
| SR301 Pipe Freeing Agent | |
| ZH-2 Corrosion Inhibitor for Drilling Fluid | |
