OME-1 is a kind of tall oil fatty acid amine emulsifier. Compare to the similar product, OME-1 has a lot of advantages: Firstly, it has strong emulsifying ability and effectively reduce the surface tension of water. Secondly, it has excellent resistance to high temperature. The temperature resistance is to 180 ºC. OME-1 is suitable for mixed water in oil and oil base drilling fluids. The recommended dosage is 5.0-15.0 ppb.
Item | Specification |
Appearance | Reddish-brown viscous liquid |
Density, g/cm | ≥ 0.85 |
Flash point,ºC | ≥ 120.0 |
Emulsification rate, % | ≥95.0 |
Surface tension, mN/m | ≤50.0 |
- Strong surface activity and emulsifying ability, suitable for mixing water in oil and oil base drilling fluids.
- Good thermal stability which is up to 180ºC, can be used in deep wells and ultra-deep wells.
- Compatible with other OBM additives well.
It is a liquid packaged in 50L, 200 L, 1000L drums. International packaging may vary. And they shall be stored in a shady and dry place with good ventilation
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.Handling methods and dangerous data shall be referred to MSDS.





I . Filtration Reducer For WBM | |
DSP-1 HTHP Polymer Filtration Reducer | |
DSP-2 Polymer Filtration Reducer | |
PAN-Trol Low Viscosity Polymer for Filtration Reducing | |
PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
SMP Sulfomethylated Phenolic Resin | |
SMP-III Sulfomethylated Phenolic Resin | |
SPNH Lignite Resin for Drilling Fluid | |
LYS Modified Starch | |
SHR-1 Modified Starch HT | |
DACP Alkyl cellulose polysaccharide for drilling fluid | |
II. Shale Inhibitor For WBM | |
NP-1 Nano-polyester for Drilling Fluid | |
NS-1 Nano-SiO2 | |
FF-I Sulfonated Asphalt(High purity) | |
FF-V Sulfonated Asphalt(Ecnomical) | |
FF-III Emulsified Asphalt | |
AP-1 Polyamine Shale Inhibitor | |
POLYOL | |
DLA-1 Aluminum Based Shale Inhibitor | |
III. Lubricant For WBM | |
HEP-1 EP Lubricant for High Density Mud | |
EP-202 EP Lubricant for Drilling Fluid | |
EP-204 Oil Base Lubricant for Drilling Fluid | |
GR Solid Lubricant (Graphite base) | |
IV. Thinner For WBM | |
SF Silicon-fluorine Thinner | |
DLST CF Chromium Free Lignosulfonate Thinner | |
V. Lost Circulation Materials | |
SDF3 Compounded LCM | |
GWS-1 Delayed Expansion LCM | |
HFD-1 Rapid Filtrating High Strength LCM | |
VI. OBM Additives | |
OME-1 Primary Emulsifier for OBM | |
OME-2 Secondary Emulsifier for OBM | |
OFC OBM Filtration Reducer | |
OMP-1 Nano-Polymer Sealing Additive for OBM | |
OMP-2 Expanded Graphite Plugging Agent for OBM | |
VII.Defoamer For WBM | |
Polyether Defoamer | |
PD-100 Organosilicon Deformer | |
VIII. Bactericide For WBM | |
JM-1 Bactericide for Drilling Fluid | |
IX. Filtration Reducer For Cementing | |
DSPC-1 Filtration Reducer For Cementing | |
DSPC-2 Filtration Reducer For Cementing | |
X. Other Series | |
SR301 Pipe Freeing Agent | |
ZH-2 Corrosion Inhibitor for Drilling Fluid |