Message : Hi i would like to know if i want like the CBL-86 with a 2:1 resistance, with 2 X 100kg with a decline and incile bench with rope,bar etc price shipping include to Canada g0m1k0 thanks

MadeinChina Team
Aug 3, 2026 at 2:00 AM Reply

Dear jean,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

Hi!

I’m really interested in your product, but before placing a larger order, I’d like to know if it would be possible to arrange a first delivery so I can test it.

If so, could you please let me know the shipping cost for 60 m² of one of your lighter wood finishes and another 60 m² of a medium-light finish?

I also wanted to ask if you have any real-life videos showing the product in more detail, especially after installation.

Finally, is the material easy to cut on-site, and is it possible to make seamless joins between panels?

Thank you! I look forward to hearing from you.

MadeinChina Team
Aug 3, 2026 at 2:00 AM Reply

Dear Sabin,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

Dear Supplier,

I would like to request a quotation for the XE‑20 mechanical seal.

Ideally, I would need only one piece. Could you please let me know whether it is possible to purchase a single unit?

If single‑piece ordering is not available, please provide the total price for the minimum order quantity (as the page indicates a reference price of around 10 USD per piece) and also the lowest‑cost shipping option to Hungary.

Thank you in advance for your assistance.

Kind regards,
Sándor

MadeinChina Team
Aug 3, 2026 at 2:00 AM Reply

Dear Sandor,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

Subject: Request for Quotation – Supply of 200 Sets Stainless Steel Submersible Water Pump Package for Solar PV Cleaning

MadeinChina Team
Aug 3, 2026 at 12:00 AM Reply

Dear shaher,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

• Quantity: 200 Units
• Application: Cleaning of solar PV panels using pressurized clean water
• Pump Type: Stainless steel submersible clean water pump
• Power Supply: Single Phase, 220 VAC, 50 Hz
• Power Rating: 500–700 W
• Maximum Head: Up to 30 m
• Flow Rate: 5–40 L/min depending on head
• Pump Body Material: Stainless steel, corrosion resistant

MadeinChina Team
Aug 2, 2026 at 10:00 PM Reply

Dear shaher,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

Hello friend ,
We are a Moroccan company specialized in the distribution of sanitary equipment for the food, pharmaceutical, cosmetic and chemical industries.
As part of the expansion of our product range, we would like to extend our range of SMS food-grade pipe, and we are reaching out to request your best commercial offer.
In order to facilitate the review of your proposal, please find below our requirements:
General technical specifications:
• Type of pipe : welded tube
• Material: AISI 304L / 316L stainless steel
• Standards: EN 10357 / SMS
• Surface finish: Interior polished (Ra ≤ 0.8 µm), exterior satin finish
• Connection type: SMS (weld end)
• Brand : mark our brand on pipe
Additional information requested:
• Manufacturing lead time
• Payment terms
• Available certifications (CE, FDA, 3-A, EN 10204 3.1 , MTC , Ra )
• FOB shipping
We remain at your entire disposal for any further information you may require.
Best regards,

HAFID ADAHRI
HD PROCESS

MadeinChina Team
Aug 2, 2026 at 10:00 PM Reply

Dear HAFID,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

Dear sir,

Raw & Pack is a leading indenting company representing quality, reliability, and high standards in Bangladesh for the last twenty years. Raw & Pack specializes in sourcing, importing, and indenting quality ingredients for Pharmaceutical, Food, Textile, and Industrial chemicals. We always aim to supply the best quality products and services to our customers from all around the world.

We learned that you are a leading manufacturer and exporter of Zipper Bag. We want to import Zipper Bag from your company. One of our customers' inquiries is detailed below:

Item: Zipper Bag for Pharma

3 Side Seal 1 side Open Round Corner Zipper Pouch Pack.
Layers: M. BOPP+ Alu+ LDPE
Printed ( Artwork and drawing to be shared after evaluation of Quotation.
GSM: 110 ± 10
Length: 180 ± 1 mm.
Width: 115± 1 mm.
Air tightness to be ensured.
Zipper Position: 25 mm Distance from Top edge.
Qty: 500,000pcs
Shipment: CFR Chattogram by Sea
Payment: L/C at sight

Please let us know the quotation USD/1000pcs CFR Chattogram by sea. We hope you will give us your best competitive price so that we can start a business together with your good and reputed company. We believe in a long-term business relationship based on trust and mutual benefits.

Waiting for your very kind reply.

Best regards

MadeinChina Team
Aug 2, 2026 at 10:00 PM Reply

Dear Md,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

I want 1000pcs of eliquid Minoa

MadeinChina Team
Aug 3, 2026 at 10:00 AM Reply

Dear Banda,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

Made in China Customer Service Team

My name is Donna Darthuizen and I am the founder of CloakDots, a European company developing a new category of Personal Biometric Privacy technology.

We are currently looking for an experienced eyewear manufacturer to explore a new product concept involving specialised optical lenses and custom eyewear development.

I came across your profile as I was looking specifically for infrared-blocking lenses, and I would be very interested to speak with someone on your technical/OEM team about your capabilities.

At this stage, I’d simply like to establish whether our project could be a good fit for your company. If so, I can provide more information and we can discuss technical requirements, prototyping and production in more detail.

Could you please put me in contact with the appropriate person?

Many thanks,

Donna
Founder, CloakDots.com
Digital Commerce Guild | CloakDots

MadeinChina Team
Aug 2, 2026 at 10:00 PM Reply

Dear Donna,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

this product price

MadeinChina Team
Aug 2, 2026 at 10:00 PM Reply

Dear shivam,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

I want clutch fibre for tricycle bajaj

MadeinChina Team
Aug 2, 2026 at 8:00 PM Reply

Dear Frank,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

How can I order samples?

MadeinChina Team
Aug 2, 2026 at 8:00 PM Reply

Dear VIJAY,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

NEED SHREDDER



AmshA
MARJAN POLYMER INDUSTRIES
PAKISTAN

MadeinChina Team
Aug 2, 2026 at 6:00 PM Reply

Dear AmshA,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Hello,

I am looking for one ice-bath chiller for home use in Singapore.

Required electrical supply: 220–240 V, 50 Hz.
2 HP model
Water volume: 200 litres.

Target cooling performance: approximately 28°C to 5°C within 2 hrs

Target operating temperature: down to 3-5°C.

Required features:
iOS and Android app control
Smart timer and remote power control
UV steriliser
80-mesh pre-strainer
20-micron replaceable filter
Additional fine filtration stage
Self-priming circulation pump
Leakage protection
Outdoor or IPX4-rated housing

questions

Could you give me an indicative cost for freight, please?
What is the noise level like, please?
Is there any warranty certifications?
Could you advise what the lead time would be?
Have you sent these machines to Singapore before?
Are there any extra costs I should be familiar with?
Is it possible to buy these filters in Singapore? I assume so.

Thank you
Christian Tan

MadeinChina Team
Aug 2, 2026 at 6:00 PM Reply

Dear Christian,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Hi,

I’m looking to source a small range of black glass jars with natural bamboo lids and wanted to see what in-stock options you currently have available.

I’m particularly interested in:

• Smaller jars around 50–60 mL, preferably squat and straight-sided with a wide opening and minimal shoulder/lip
• Larger jars around 100–200 mL in a matching or similar style
• Matte, frosted or dark black glass
• Natural bamboo screw lids with a suitable liner/seal

At this stage, I’m only interested in your existing stock products rather than custom manufacturing, colours or printing.

Could you please send through any suitable options you currently have, including dimensions, pricing, minimum order quantities and sample availability?

I’m happy to consider different sizes or styles if you have something similar in stock.

Thanks,

Ben

MadeinChina Team
Aug 2, 2026 at 6:00 PM Reply

Dear Ben,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Subject: Hardware ODM Inquiry – Custom PCB Carrier Board for ESP32-S3 Wi-Fi Temperature Logger (Internal Sensor, Vakave Brand)

Dear Sales & Engineering Team,

My name is Abbas, representing Dadeh Kavan Sanat Khwarazmi Co. (Brand: Vakave) based in Iran. We develop laboratory management software (LIMS/QMS) and are looking for a long-term hardware-only ODM partner to manufacture a custom Wi-Fi temperature data logger under our own brand.

Before detailing the specs, I want to proactively address two potential concerns:

1. Payments: We are fully aware of international banking restrictions. We handle all cross-border payments via a third-country intermediary (UAE/Turkey) and are comfortable with RMB settlements or alternative compliant channels. We will sign any necessary compliance waivers regarding export controls.

2. Scope: We do not require your software or cloud platform. We only need the hardware (PCB + casing + battery compartment). We will develop and flash our own firmware entirely in-house.

Our Core Requirement:
We need a custom carrier board that houses an ESP32-S3 or ESP8266-12F module (we prefer the S3 for future scalability), along with a precision temperature sensor, power management circuit, and external Flash memory for local data buffering. The final device must be branded with our "Vakave" logo on the plastic housing.

Detailed Hardware Specifications:

- Chipset: ESP32-S3 (or ESP8266-12F with minimum 4MB Flash or any wi-fi enabled architecture). Crucial: The PCB must break out the UART0 pins (TX, RX, GPIO0, and EN) to a standard 4-pin programming header (e.g., 2.54mm pitch) to allow us to flash our custom firmware via USB-UART without disassembling the device. Hardware should allow us to use ArduinoIDE to flash the hardware, so bootloader maybe needed.

- Sensor: Onboard / internal NTC thermistor or digital sensor (e.g., SHT30, TMP117, or PT1000) mounted directly on the PCB. The device will be placed entirely inside the laboratory freezer/refrigerator.

- Measurement Range: -30°C to +70°C (ambient air temperature inside the chamber).

- Accuracy: ±0.3°C (preferred) or ±0.5°C maximum.

- Resolution: 0.1°C.

- Data Buffering: Onboard Flash memory (at least 2MB)

- Power: Powered by 2x AA 1.5V Lithium batteries (non-alkaline, specifically rated for -30°C operation) or a rechargeable 18650 Li-ion cell. Target battery life: 3 to 6 months with a 10-minute transmission interval (Wi-Fi in deep-sleep mode between transmissions).

- Connectivity: Wi-Fi 2.4 GHz (802.11 b/g/n). Note: Since this will be inside a metal freezer, we need a high-sensitivity PCB antenna or an optional external SMA antenna port to ensure signal penetration through the door seal.

- Physical Interface: One multi-function button (for reset/pairing) and a single RGB LED for status indication. No display required.

Certification & Compliance:
We understand that CE/RoHS applies to the final assembled hardware. We ask that your base PCB and components are RoHS-compliant and that you can provide the CE test reports for the ESP32 module itself. We will handle the final product certification after we flash our firmware.

Commercial & Technical Questions:
We are serious about a long-term partnership and are prepared to pay a separate NRE (Non-Recurring Engineering) / Tooling fee for the custom PCB layout, plastic mold modification, and logo printing.

Please provide the following:

1. NRE / Development Cost: One-time fee for hardware design adjustments, creating the flashing jig, and adding our logo to the casing.

2. Sample Cost & Lead Time: Cost for 5 engineering samples and the time required to produce them.

3. Unit Pricing: Price tiers for 100, 500, and 1,000 units (production order).

4. Production Lead Time: Estimated time from order confirmation to shipment for the 1,000-unit batch.

5. Technical Confirmation: Can you confirm that the PCB layout places the temperature sensor away from the ESP32 chip and battery (to avoid self-heating interference)? Also, please confirm the programming header pinout, and or if you use other chipsets and wi-fi modules, are we able to flash the device using ArduinoIDE and able to access the GPIOs??

We would greatly appreciate a short online meeting (via Zoom/WeChat/Teams) with your engineering team to go over the thermal insulation design of the enclosure and the antenna placement for internal Wi-Fi penetration.

Thank you for your time. I look forward to your positive response.

Best regards,

Abbas
Representative of Dadeh Kavan Sanat Khwarazmi Co.
Vakave Laboratory Software
Iran

MadeinChina Team
Aug 2, 2026 at 6:00 PM Reply

Dear AbbasEbrahimi,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Please refer the details below & quote your best prices along with delivery time & datasheet.



SMC- FLEX CONTROL MODULE,TYPE: 150-FS1FX, BRAND: ALLEN-BRADLEY, INPUT VOLTAGE: 100-240VAC, FREQUENCY: 50/60HZ
QTY – 4 M

Soft Starter Control Module,AB SMC-3, Allen-Bradley SMC-3 Smart Motor Controller - Control/Logic Module (power/SCR section not included), Catalogue No. 40891-454-11, FRN 2.11, S/N 61106AB3
QTY – 5 EA

MadeinChina Team
Aug 2, 2026 at 4:00 PM Reply

Dear SAUD,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Greetings from Alamty Kazakhstan
I want second hand Ying Yang carding machine.

MadeinChina Team
Aug 2, 2026 at 2:00 PM Reply

Dear MK,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Can I use this bed also as a sofa? It is quoted at $580

MadeinChina Team
Aug 2, 2026 at 2:00 PM Reply

Dear Askwar,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Dear JIANGXI XIERKANGTAI PHARMACEUTICAL CO., LTD. Team,

Greetings!

We are interested in importing your pharmaceutical products into the Philippines, particularly your Triamcinolone Acetonide Acetate + Miconazole Nitrate + Neomycin Sulfate Cream SF PKS Cream (Antifungal/Antibacterial/Anti-Inflammatory).

If possible, could you please provide us with an email address or contact us via email so that we may discuss this opportunity more conveniently? We would like to inquire further about your products and the possibility of establishing a business relationship.

Thank you, and we look forward to hearing from you.

Kind regards,
Angeline Chiong, RPh
Board Director/ Pharmacist

MadeinChina Team
Aug 2, 2026 at 12:00 PM Reply

Dear Angeline,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Do you have a similar product at 2500 lb capacity instead of 7000lb? To save cost? Probably start with 500 pieces

MadeinChina Team
Aug 2, 2026 at 12:00 PM Reply

Dear Tom,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Required for A4 size frames

MadeinChina Team
Aug 2, 2026 at 12:00 PM Reply

Dear Md,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

I am looking for custom printed neopren floor runners

MadeinChina Team
Aug 2, 2026 at 10:00 AM Reply

Dear Karel,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Request for Quotation – Custom Heavy-Duty Frosted Plastic Shopping Bags (25,000 pcs)
Dear Jessica Fu,

My name is Manuel Parés, and I represent SVC Foundation Corp, a registered 501(c)(3) nonprofit organization based in Florida, USA.
We are looking for a long-term manufacturer for custom heavy-duty plastic shopping bags used for food distribution programs. We would appreciate receiving your quotation based on the following specifications.

PRODUCT SPECIFICATIONS

Quantity

Initial Order: 25,000 bags
Material

100% Virgin LDPE
Finish

Frosted White (Translucent Matte)
Dimensions

Width: 47 cm
Height: 47 cm
Bottom Gusset: 23 cm
(Approximately 18.5" × 18.5" × 9")
Thickness

Preferred: 5 mil (approximately 125 microns)
Alternative quotation: 4.5 mil (approximately 115 microns)
Handles

Soft Loop Handles
Double Reinforced Patch Handles
Heavy-duty construction
Printing

Custom logo
Front and back printing
One PMS color
Please indicate additional cost for two-color printing.
Load Capacity

Minimum safe load: 20 kg (44 lbs)
The bags will be used to distribute food and must withstand heavy loads without handle failure.
Packaging

Please indicate the number of bags per carton.
Gross weight per carton.
Carton dimensions.
Quotation Requested

Please include the following information:

Unit price FOB China.
Unit price CIF Port of Miami, Florida, USA (if available).
Minimum Order Quantity (MOQ).
Tooling, mold, plate, or artwork charges.
Production lead time.
Estimated shipping time to Miami.
Available certifications (ISO, SGS, food-contact compliance, etc.).
Available material colors.
Artwork requirements.
Samples availability and cost.
If possible, please also provide:

Technical drawing or dieline.
Product photographs.
High-resolution images of similar bags.
Material specifications.
Recommended thickness for carrying approximately 20 kg of food.
We are interested in establishing a long-term relationship with a reliable manufacturer and expect additional orders if the first production meets our quality requirements.

Thank you for your time. We look forward to receiving your quotation.

MadeinChina Team
Aug 2, 2026 at 10:00 AM Reply

Dear Manuel,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Hhsjsjdhjd

Myanmar Burma channel

MadeinChina Team
Aug 2, 2026 at 10:00 AM Reply

Dear יאן,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Dear Ms. Lancy Liu,

I hope you are doing well.

My name is Jacque and I am based in the United Kingdom and Spain. We are currently developing a premium food-grade nitrous oxide cylinder for the UK and European markets and are looking for a reliable long-term OEM manufacturing partner.

After reviewing your company profile, we believe Hunan Huiteng Gas would be an excellent partner due to your experience manufacturing and exporting cream charger cylinders to Europe.

We would appreciate a quotation and technical proposal for the following project.

Product Requirements

* Food-grade Nitrous Oxide N₂O
* Approximately 670g filling capacity
* Disposable cylinder
* Matte black finish
* Custom private label branding
* High-quality printed logo
* Suitable for the UK and European markets

Please provide quotations for both:

* Steel cylinder
* Aluminium cylinder

For each option, please include pricing for:

* 2,000 units
* 5,000 units
* 10,000 units
* 25,000 units
* 50,000 units

We would also appreciate information on:

* Minimum order quantity
* Lead time
* Sample availability and pricing
* FOB pricing
* CIF pricing to Felixstowe Port, United Kingdom or Barcelona Spain
* Packaging options
* Production capacity per month
* Available certifications for export to the UK and Europe
* Whether you can assist with private label design and packaging

In addition, we are interested in developing a premium product that differentiates itself from standard cream chargers. We would like to know whether your engineering team can support custom bottle shapes, colours, finishes, and future product development.

If possible, please send photographs and technical specifications for similar 640g–680g cylinders you currently manufacture.

We are looking to build a long-term partnership and expect repeat orders if the initial launch is successful.

Thank you for your time, and I look forward to your reply.

Kind regards,

Jacque

MadeinChina Team
Aug 2, 2026 at 8:00 AM Reply

Dear Jacque,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

cashew sheller machine

MadeinChina Team
Aug 2, 2026 at 8:00 AM Reply

Dear Dennis,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Subject: Turnkey Motorcycle Tire Plant Inquiry – Complete Equipment, Training & After-Sales Support

Dear Mr. Gavin Teng / Sales Team,

I hope this message finds you well. I am writing on behalf of our company, which is establishing a new motorcycle tire manufacturing plant in Algeria. Given the favorable investment climate in Algeria—including tax incentives and strong government support for local manufacturing—we see a significant market opportunity for a domestic tire producer. After extensive research, we believe Qingdao Augu Automation, with your proven expertise in turnkey solutions for motorcycle and bicycle tire plants, would be the ideal partner for this strategic project.

---

1. Project Overview & Scope

We are seeking a complete turnkey production line for motorcycle tires (both tube and tubeless types) with the following specifications:

Item Details
Target Production Capacity 1,000 – 1,500 tires per day (initial phase)
Tire Sizes to be Produced 17", 18", 19", 21" (and other common motorcycle sizes)
Automation Level Semi-automatic to fully automatic (please advise on best cost-benefit option)
Key Machinery Required Mixing mill, extrusion line, calendering machine, tire building machine (TBM), hydraulic vulcanizing presses, molds (for all sizes), finishing and testing equipment

---

2. Detailed Quotation Request (Quantitative & Qualitative)

We kindly request your detailed technical and commercial proposal to include the following:

✅ Complete Equipment List: A comprehensive list of all machinery required for the full production line, with specifications, models, and quantities for each item.

✅ Total Investment Cost: A clear price breakdown per machine, as well as the total cost for the complete production line (including all auxiliary equipment).

✅ Molds (Moulds): Cost and lead time for manufacturing a complete set of molds for all tire sizes we intend to produce.

✅ Shipping & Logistics: Estimated cost and delivery timeline (Incoterms: CIF Algiers, Algeria).

---

3. After-Sales Support & Services (Critical for Our Decision)

As we are establishing a new plant with a relatively new team, post-sale support is of utmost importance. Therefore, we request that your quotation explicitly include:

✅ Spare Parts Commitment: A guaranteed supply of high-quality, competitively priced spare parts to minimize potential downtime. Please provide a recommended initial spare parts kit with its cost.

✅ Installation & Commissioning: Your plan for sending experienced engineers to Algeria to supervise the complete installation and commissioning of the production line. Please specify the duration and any additional costs involved (visa, accommodation, per diem, etc.).

✅ Operator & Maintenance Training: A detailed training program for our Algerian operators and maintenance staff. We expect hands-on training to be conducted at our plant during the commissioning phase, ensuring our team gains full autonomy in production and basic troubleshooting.

✅ Production Launch Support: Your commitment to providing technical support during the initial production launch phase (trial runs, formula optimization, and quality control setup) until we achieve stable production output.

✅ Warranty Period: Clear warranty terms for all equipment, including duration, coverage, and procedure for claiming warranty service.

✅ Ongoing Technical Support: Description of your after-sales support, including remote diagnostics (e.g., online/video assistance) and availability of on-site service visits if required.

---

4. Budget & Timeline Considerations

We are aiming for a cost-effective yet reliable solution that fits within our overall investment framework of $600,000 – $1,000,000 USD for the entire project (machinery, installation, training, and initial operation). We would appreciate your guidance on the most optimal configuration within this budget range.

Please include in your proposal:

· Total cost (machine price + freight + installation + training).
· Estimated lead time from order placement to shipment.
· Project timeline from order to full operational handover.

---

5. Why We Chose Your Company

We have selected Qingdao Augu Automation due to your strong reputation in the industry, your extensive experience with turnkey projects for motorcycle tire plants, and the comprehensive support you offer—from mixing formulation guidance to final product output. We trust this partnership will be mutually beneficial and long-lasting.

---

We look forward to receiving your detailed quotation and technical documentation at your earliest convenience. Please feel free to contact us for any clarifications or additional information. If you require a more specific production plan or technical drawings to fine-tune your proposal, we are ready to collaborate closely.

We eagerly await your positive response and the opportunity to build a successful partnership.

Sincerely

MadeinChina Team
Aug 2, 2026 at 6:00 AM Reply

Dear Kechida,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Hello, can i have a test code for Balkan/EXYU.

MadeinChina Team
Aug 2, 2026 at 6:00 AM Reply

Dear Dejan,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team

Please send me your certifications, product images through WhatsApp

MadeinChina Team
Aug 2, 2026 at 6:00 AM Reply

Dear Pepijn,

We have informed the supplier to contact you as soon as possible. Please check your email.

Sincerely,

MadeinChina Customer Service Team