AEP
10
Customizable
96%
50Hz/60Hz
50/60Hz
0.01%
Single/Three
DC/AC Inverter
Sine Wave Inverter
Solar Power
Active Inverter
Half-Bridge /Full-Bridge Type
Energy Storage/Hybrid Solar System
CE, ISO9001
Customizable
Hybrid, on off Grid
IP66
BOS
Wooden Crate
customizable
Jinan China
Product Description
1.
| Product model | AEP-3KS48P | AEP-3K6S48P | AEP-4KS48P | AEP-4K6S48P | AEP-5KS48P | AEP-6KS48P |
| Battery input parameters | ||||||
| Battery type | Lithium battery or lead-acid battery | |||||
| Rated battery voltage (V) | 48V | |||||
| Maximum charging voltage (V) | ≤60V(configurable) | |||||
| Maximum charging/discharging current (A) | 75A | 90A | 100A | 110A | 120A | 120A |
| PV input parameters | ||||||
| Maximum DC input power (W) | 6000W | 7200W | 8000W | 9200W | 10000W | 12000W |
| Maximum DC input voltage (V) | 500V | |||||
| Working voltage range (V) | 150~450V | |||||
| Starting voltage (V) | 125V | |||||
| Maximum input current (A) | 18A | 18A/18A | 18A/18A | 18A/18A | 18A/18A | 18A/18A |
| MPPT channels | 1 | 2 | 2 | 2 | 2 | 2 |
| AC output parameters (grid connected) | ||||||
| Maximum output apparent power (VA) | 3300 | 3960 4400 | 5000 | 5500 | 6000 | |
| Rated output voltage (V) | 220/230 | |||||
| Rated output frequency (Hz) | 50/60 | |||||
| Maximum output current (A) | 15A | 18A | 20A | 22A | 25A | 27A |
| Output power factor | 1(0.8 lead~0.8 lag) | |||||
| AC output parameters (off grid ) | ||||||
| Rated output power (W) | 3000 | 3600 | 4000 | 4600 | 5000 | 6000 |
| Peak output power (W) | >200%,15sec | |||||
| Rated output voltage (V) | 230 | |||||
| Rated output frequency (Hz) | 50/60Hz | |||||
| Maximum output current (A) | 14A | 16A 18A | 21A | 23A | 27A | |
| Efficiency | ||||||
| Maximum efficiency (PV) | 97.6% | |||||
| Maximum efficiency (battery) | 94.5% | |||||
| Efficiency in Europe | 97% | |||||
| Protection | ||||||
| PV input reverse protection | integration | |||||
| PV insulation impedance detection | integration | |||||
| Residual current detection | integration | |||||
| Output overcurrent protection | integration | |||||
| Output short circuit protection | integration | |||||
| Output overvoltage protection | integration | |||||
| Basic parameters | ||||||
| Working temperature (ºC) | -25~60ºC(>45ºC derating) | |||||
| Storage temperature (ºC) | -30~65ºC | |||||
| Relative humidity | 0~95% | |||||
| Working altitude (m) | ≤4000m(>2000m derating) | |||||
| Cooling method | natural heat dissipation | |||||
| Noise (dB) | <55dB | |||||
| Weight (kg) | 20kg | |||||
| Dimensions (Depth * Width * Height mm) | 198*427*554mm | |||||
| IP rating | IP66 | |||||
| Topological structure | High frequency isolation (battery side) | |||||
| Safety regulations/EMC certification | NB/T32004-2018,IEC62109,IEC61000,IS16169&IS16221(BIS) | |||||
| Grid-connected certification | IEC61727,EN50549-1,VDE-4105,NRS-097-2-1,OVE-Richtlinie R25,UNE217001/2,Ordinace No.140 | |||||
| Other certifications | IEC61683,IEC62116,EN50530,IEC60068 | |||||
2.
| Product model | AEP-7KS48P | AEP-7K6S48P | AEP-8KS48P | |||
| Battery input parameters | ||||||
| Battery type | Lithium battery or lead-acid battery | |||||
| Rated battery voltage (V) | 48V | |||||
| Maximum charging voltage (V) | ≤60(configurable) | |||||
| Maximum charging/discharging current (A) | 175A | 190A | 190A | |||
| PV input parameters | ||||||
| Maximum DC input power (W) | 14000W | 15200W | 16000W | |||
| Maximum DC input voltage (V) | 500V | |||||
| MPPT voltage range (V) | 150~450V | |||||
| Starting voltage (V) | 125V | |||||
| Maximum input current (A) | 30A/18A | 30A/18A | 30A/18A | |||
| MPPT channels | 2 | 2 | 2 | |||
| AC output parameters (grid connected) | ||||||
| Maximum output apparent power (VA) | 7700 | 8360 | 8800 | |||
| Rated output voltage (V) | 220/230V | |||||
| Rated output frequency (Hz) | 50/60Hz | |||||
| Maximum output current (A) | 35A | 38A | 40A | |||
| Output power factor | 1(0.8 lead~0.8 lag) | |||||
| AC output parameters (off grid ) | ||||||
| Rated output power (W) | 7000 | 7600 | 8000 | |||
| Peak output power (W) | >200%,15sec | |||||
| Rated output voltage (V) | 220/230V | |||||
| Rated output frequency (Hz) | 50/60Hz | |||||
| Rated output current (A) | 35A | 38A | 40A | |||
| Efficiency | ||||||
| Maximum efficiency (PV) | 98% | |||||
| Maximum efficiency (battery) | 94.5% | |||||
| Efficiency in Europe | 97.5% | |||||
| Protection | ||||||
| PV input reverse protection | integration | |||||
| PV insulation impedance detection | integration | |||||
| Residual current detection | integration | |||||
| Output overcurrent protection | integration | |||||
| Output short circuit protection | integration | |||||
| Output overvoltage protection | integration | |||||
| Basic parameters | ||||||
| Working temperature (ºC) | -40~60ºC(>45ºC derating) | |||||
| Storage temperature (ºC) | -30~65ºC | |||||
| Relative humidity | 0~95% | |||||
| Working altitude (m) | ≤4000(>2000 derating) | |||||
| Cooling method | Intelligent speed regulation air cooling | |||||
| Noise (dB) | <55dB | |||||
| Weight (kg) | 21.5kg | |||||
| Dimensions (Depth * Width * Height mm) | 198*427*554mm | |||||
| IP rating | IP66 | |||||
| Topological structure | High frequency isolation (battery side) | |||||
| Safety regulations/EMC certification | NB/T32004-2018,IEC62109,IEC61000,IS16169&IS16221(BIS) | |||||
| Grid-connected certification | IEC61727,EN50549-1,VDE-4105,NRS-097-2-1,OVE-Richtlinie R25,UNE217001/2,Ordinace No.140 | |||||
| Other certifications | IEC61683,IEC62116,EN50530,IEC60068 | |||||
3.
| Product model | AEP-5KS48P3 | AEP-6KS48P3 | AEP-7KS48P3 | AEP-8KS48P3 | AEP-10KS48P3 | AEP-12KS48P3 |
| Battery input parameters | ||||||
| Battery type | Lithium battery or lead-acid battery | |||||
| Rated battery voltage (V) | 48V | |||||
| Maximum charging voltage (V) | ≤60V(configurable) | |||||
| Maximum charging/discharging current (A) | 120A | 125A | 150A | 190A | 210A | 250A |
| PV input parameters | ||||||
| Maximum DC input power (W) | 10kW | 12kW | 14kW | 16kW | 20kW | 24kW |
| Maximum DC input voltage (V) | 1000 | |||||
| MPPT voltage range (V) | 200~800V | |||||
| Starting voltage (V) | 150V | |||||
| Maximum input current (A) | 18A | 18A | 18A | 18A/18A | 36A/18A | 36A/18A |
| MPPT channels | 1 | 1 | 1 | 2 | 2 | 2 |
| AC output parameters (grid connected) | ||||||
| Maximum output apparent power (VA) | 5500 | 6600 | 7700 | 8800 | 11000 | 13200 |
| Rated output voltage (V) | 380/400V | |||||
| Rated output frequency (Hz) | 50/60Hz | |||||
| Maximum output current (A) | 8.3A | 10A | 11.6A | 13.3A | 16.7A | 20A |
| Output power factor | 1(0.8 lead~0.8 lag) | |||||
| AC output parameters (off grid ) | ||||||
| Rated output power (W) | 5000 | 6000 | 7000 | 8000 | 10000 | 12000 |
| Peak output power (W) | >200%,15sec | |||||
| Rated output voltage (V) | 380/400V | |||||
| Rated output frequency (Hz) | 50/60Hz | |||||
| Rated output current (A) | 8.3A | 10A | 11.6A | 13.3A | 16.7A | 20A |
| Efficiency | ||||||
| Maximum efficiency (PV) | 98% | |||||
| Maximum efficiency (battery) | 94.5% | |||||
| Efficiency in Europe | 97.5% | |||||
| Protection | ||||||
| PV input reverse protection | integration | |||||
| PV insulation impedance detection | integration | |||||
| Residual current detection | integration | |||||
| Output overcurrent protection | integration | |||||
| Output short circuit protection | integration | |||||
| Output overvoltage protection | integration | |||||
| Basic parameters | ||||||
| Working temperature (ºC) | -25~60ºC(>45ºC derating) | |||||
| Storage temperature (ºC) | -30~65ºC | |||||
| Relative humidity | 0~95% | |||||
| Working altitude (m) | ≤4000m(>2000m derating) | |||||
| Cooling method | Intelligent speed regulation air cooling | |||||
| Noise (dB) | <55dB | |||||
| Weight (kg) | 38kg | |||||
| Dimensions (Depth * Width * Height mm) | 475*683*256mm | |||||
| IP rating | IP66 | |||||
| Topological structure | High frequency isolation (battery side) | |||||
| Safety regulations/EMC certification | NB/T32004-2018,IEC62109,IEC61000,IS16169&IS16221(BIS) | |||||
| Grid-connected certification | IEC61727,EN50549-1,VDE-4105,NRS-097-2-1,OVE-Richtlinie R25,UNE217001/2,Ordinace No.140 IEC61683,IEC62116,EN50530,IEC60068 | |||||
| Other certifications | ||||||
Shandong BOS Energy Technology Co., Ltd. (referred to as BOS) is a high-tech enterprise in Shandong Province specializing in the research and development, manufacturing, sales, and service of power equipment. For more than 20 years, BOS has focused on power electronic conversion technology. Committed to providing customers with the best system solutions, our products include AC/DC test power supplies, AC/DC power supplies, shore power, and new energy product lines. The production base covering an area of 20000 square meters, built in 2010, has an annual output value of over 100 million yuan. BOS is one of the most influential "leading enterprises" among domestic high-power power supply manufacturers.
BOS has multiple national patents in the field of power supply and has passed international ISO9001 quality system certification, ISO14001 environmental management system certification, and ISO45001 occupational health and safety management system certification; And has successively won honors such as specialized and innovative, gazelle enterprise, and high-tech enterprise, as well as awards such as "Best Supplier of Small and Medium Power Bidirectional Energy Storage Inverters"; Establishing an energy conversion and energy storage engineering technology center; It is a member unit of the China Power Association, a member unit of the Port Science and Technology Committee, an executive director unit of the China Renewable Energy Association, and a qualified supplier for procurement by the Chinese Academy of Sciences.
1.Q:Are you manufacturers?--Yes, we have an independent factory covering an area of over 20000 square meters.
2. Q:Can the power of the product be customized?
--Yes, we can customize products according to your needs.
3.Q: Is there any guarantee for after-sales service after purchasing products from your store?
--Yes,during the warranty period, we will regularly visit customers and collect feedback information to continuously improve the quality of our company's products and services.
4.Q:How is your production management and quality control?
--Our company's production process for all products follows ISO9001, with professional operators controlling each production step. Quality inspectors also conduct regular inspections, and after each product undergoes performance testing, a comprehensive quality inspection will be conducted.
