8011
Roll
Half Hard
mill finish or lacquer
Thick Foil
Double light Aluminum Foil
Rolling
aluminum
Mill Finish or Color Laquared
8011 3105
HM
Wooden Case, Wooden Pallet
sheet, coil, strip
China
76071190
Product Description
aluminum coil wine bottle caps
1. Alloy: 8011, 3105
2. Temper: H14, H24, H16, H26
3. Pattern: rolled, degreased, pre-lubricated, pre-treated, lacquered
4. Thickness: 0.16 0.23mm
5. Width: 500 ~ 1200mm
6. Length: 500 ~ 1200mm
7. Coil ID: 75, 150, 300, 500, etc
8. Origin: China
9. Performance of printed aluminum sheet:
1) In complete sizes and sorts, with clear and beautiful pattern.
2) If applying fluorescence, change to different temperatures and composite anti-forging printing technique, the effect will be better.
3) High temperature resistant without any distortion and color change;
4) The paint won't peel off during production;
5) Tensile Strength: 145;
6) Yield Strength: 136-137;
7) Elongation: 2.0;
8) Earing Rate: <2%;
9) It's the best material for medicine/wine caps;
10) Small order is acceptable.
10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight;
Lead Time: Within 30 days after receiving deposit
TOLERANCE
Haomei supplies aluminum sheet and coils for the manufacture of bottle closures. Applications range from screw caps for whiskey and other beverage bottles to aluminum closures for wine bottles. ROPP cap material can be ordered as rolled, degreased, pre-lubed, pre-treated and / or lacquered
Aluminum - the ideal material for the production of bottle closures:
is light weight
is easily and economically recycled
has superior barrier qualities
has good formability
offers a bright finish for decoration.
1. Alloy: 8011, 3105
2. Temper: H14, H24, H16, H26
3. Pattern: rolled, degreased, pre-lubricated, pre-treated, lacquered
4. Thickness: 0.16 0.23mm
5. Width: 500 ~ 1200mm
6. Length: 500 ~ 1200mm
7. Coil ID: 75, 150, 300, 500, etc
8. Origin: China
9. Performance of printed aluminum sheet:
1) In complete sizes and sorts, with clear and beautiful pattern.
2) If applying fluorescence, change to different temperatures and composite anti-forging printing technique, the effect will be better.
3) High temperature resistant without any distortion and color change;
4) The paint won't peel off during production;
5) Tensile Strength: 145;
6) Yield Strength: 136-137;
7) Elongation: 2.0;
8) Earing Rate: <2%;
9) It's the best material for medicine/wine caps;
10) Small order is acceptable.
10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight;
Lead Time: Within 30 days after receiving deposit
Chemical Composition limits(WT.%) | ||||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al | ||||
| 8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | - | 0.1 | 0.08 | Remains | ||||
| 3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | - | 0.4 | 0.1 | Remains | ||||
| Mechanical Property for Continuous Casting | ||||||||||||||
| Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) | ||||||||||
| 8011 | H14 | 0.16~0.23 | 185~205 | >=2 | ||||||||||
| Mechanical Property for Direct Casting | ||||||||||||||
| Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) | ||||||||||
| 8011 | H14 | 0.16~0.23 | 125~155 | >=2 | ||||||||||
| Thickness | Width | Length | Squareness |
| ±0.005mm | ±0.05mm | ±0.05mm | ≤0.3mm |
Haomei supplies aluminum sheet and coils for the manufacture of bottle closures. Applications range from screw caps for whiskey and other beverage bottles to aluminum closures for wine bottles. ROPP cap material can be ordered as rolled, degreased, pre-lubed, pre-treated and / or lacquered
Aluminum - the ideal material for the production of bottle closures:
is light weight
is easily and economically recycled
has superior barrier qualities
has good formability
offers a bright finish for decoration.
