Z3000A
Carbon Chain Polymer
Light Yellow Transparent Viscous Liquid
JINGJU
230kgs/Drum
PA, DEG synthetic
China
3907999990
Product Description
Product Description
| General description | Z3000A is a modified polyester polyol based on PTA and polyol synthesis. Widely used in polyisocyanurate foam. | ||||||||||||
| Main advantage Major application | • High benzene ring content, with good structural flame retardancy, temperature resistance, heat resistance, hydrolysis resistance. • Good strength and toughness and dimensional stability. • The foam cell is fine and uniform with low thermal conductivity; • Rigid polyurethane foam, PIR system; •Spray, casting and block foam. | ||||||||||||
| Specification |
| ||||||||||||
| Package | 230KG/steel drum,1000KG/IBC,25 tons/iso-tank or as per request. | ||||||||||||
| Storage |
| ||||||||||||
| Safety | Z3000A is a polyol based substance, it may cause slight to moderate irritation on direct contact with the skin, eyes and mucous membranes, particularly if contact is prolonged. Safety goggles and impermeable protective gloves should always be worn if there is a risk of direct exposure when handling this product. Splashes in the eyes should be removed immediately by careful flushing with copious amounts of water. If irritation persists, medical attention should be obtained. Splashes on the skin should be wiped off immediately, after which the contaminated areas should be thoroughly washed with soap and water. A good barrier cream should then be applied. Contaminated clothing should be removed immediately to prevent further skin contact and thoroughly cleaned before reuse. The product should be kept away from food, drinks and tobacco. Further technical information relating to safety can be found in the Safety Data Sheet. |
Company Profile
With over 20 years technical and production experience accumulation in polyurethane rigid foam industry,especially we have core technical on high flame resist (B1 class)rigid PIR/PUR sandwich panel,from base polyol to blended polyol system,this enable us having lead position in this specific rigid PU foam industry. Based on above team set up Jingju company in March,2023.
We Focus on:- Based polyols like polyether polyol, polyester polyol and FR polyol development and production.
- PU system applications development, production, sales and technical service.
We are confident to provide you with most suitable solution in the field of PU rigid foam.
