Particle board Production Machine introduction
Particleboard made by all kinds of branch buds, small wood, fast-growing wood, wood chips and other cutting into a certain specification of debris/strands/shavings, after drying, mixed with glue, hardener, water repellent, etc., under a certain temperature and pressure to make a wood-based board, particles arranged uneven.
Particle board production machine for making particle board, and particle board can be used for making Kitchen cabinet, substrate, cabinet countertop, floor bedding board, housing flooring board.
Particle board can be different size as different country and market or clients requires. this production line for making 1220*2440mm particle board. If you need produce other size, also no problem.
The full particle board production machine, through process wood and trunks, straw, or other material, to make them into small and certain wood strands size, then through the whole production step like drying, gluing, forming, pressing, cooling, sanding, to make the required particle board size and thickness.
What are advantages of Particle board? compare with other wooden panel
The major advantages as below:
> it is a cost-effective option against plywood or medium density fiberboards.
> Laminated particle boards and veneered particle boards provide decorative looks in low price as compared to plywood.
> It provides smooth and flat surface for sticking decorative laminates or wood veneer.
> This particle board is stronger and aesthetically attractive. Thus laminated particle board and veneered particle boards are now used in mass production of office furniture.
> Due to its lightweight property, particle board can be easily transported and handled.
> Particle board has more screw holding capacity as compared to MDF, so it is widely used to make furniture which can be assembled using screws.
> It requires minimal maintenance and is easy to clean.
> Particle boards have thermo-acoustic insulation properties, so they are very much useful in speakers and in false ceiling of auditoriums, theaters, etc.
> It is an eco-friendly material as it uses wood waste such as wood chips, sawdust, wooden shavings, and bagasse which is residue of sugarcane after the juice is extracted.
>>>> Mainly Particleboard Production Machine Introduction
>>>> Specification of the Full Particleboard Production Line
<1> Drum Chipper
| Inlet size | 240*750mm(H*W) |
| Blade quantity | 2pcs |
| Knife roll diameter | 800mm |
| Power | 132kw |
<2> Ring Chipper
| Wood strands thickness | 0.4-1.0mm |
| Capacity | 5000-8000kg/h |
| Knife length | 449mm |
| Power | 250kw |
<3> Triple Pass Drying Machine
| Cpacity | 10000kg/h |
| Original moisture | ≤80% |
| End moisture | 2% |
| Power | 440kw |
<4> Vibrating screen
| Screening cloth | 2 |
| Screening area | 12 m2 |
| Screening capacity | 70m3/h |
| Power | 11kw |
<5> Gluing
| Capacity | 500m3 /per day |
| One set for spreading glue on surface strands One set for spreading glue on core strands | |
<6> Forming machine
| Surface forming machine | 2 sets |
| Capacity | 2 *45m3/h |
| Core forming machine | 1 sets |
| Capacity | 65m3/h |
| Forming width | 1300mm |
| Forming thickness | 30-120mm |
<7> Continuous press
| Convey speed | 10-30m/min |
| Working height | 1250mm |
| Belt width | 1500mm |
| Power | 75kw |
<7> Hot press
| Pressure | 1200 ton |
| Hot plate size | 2650*1680*120mm |
| Layers | 22 |
| Heating medium | Oil |
| Heating temperature | ≤180ºC |
| Closing time | 10s |
<8> Sanding machine
| Max sanding width | 1300mm |
| Sanding thickness | 3-50mm |
| Sanding belt size | 1350*2800mm |
Please note: each machine can be different specification according to different production capacity, panel size and other factors.
>>>> About Us
We China manufacturer and supplier of Particle board making machine+ MDF board making machine +OSB board making machine. if you want to produce these board, we can offer you the full necessary production line.
With many years production experience, and adhere to continuous innovation and improvement, with specialized R&D center, obtained a number of research and development patents, with experienced technians and engineers, and professional sales team and after-sales team, We have beome one China's high-end Wood based panel machinery manufacturing enterprise.
According to your own conditions like the budget, factory room and other factors, we can offer you the suitable, good and high quality machine for help you produce good quality panel.
For us, we know clearly that only keep machine good quality, can let us develop longer and better. Therefore, we always keep to choose good material and parts to make our machine, and during the whole machine production process, be made by experienced workers, and through many times test and monitor, to make sure each production step is good, to make sure the whole machine is good
>>>> Share loading pictures of our particleboard machine
>>>> Related OSB board Making Machine
If you want OSB board, our factory also can offer the full production line for you
>>>> Questions about our particleboard machine you may want to know
<1> Machine Installation:
We can send engineers go to install machine, degue, and teach your workers
<2> Warranty:
15 months
<3> Production time:
3 months
<4> Payment terms:
T/T or L/C
<5> Factory layout:
After machine production start, we can make factory layout for you
<6> If meet problem when operation machine
Contact us at the first time, our engineers will help check and solve quickly
Welcome contact us for more information if you are interested, we will reply you quickly
