IPL 32/40/50/65/80
30-50m
>400 L/min
Motor
Single-Stage Pump
Middle Pressure Pump
Single Suction Pump
Horizontal Pump
Verticaljoint Surface Pump
Since Irrigation Centrifugal Pumps
Semi-Open
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
-20 °c to +120 °c
IP 55
1 to DN 100
10 Bar (Special Version: 16 Bar)
3~400 V, 50 Hz (Others on Request)
Wilo
Wooden Box
Product Description
Wilo VeroLine IPL Large Traffichigh Flow Cold and Hot Water Circulation Pipeline Pump
Features/Product Advantages
Design
Glanded pump in in-line design with screwed connection or flange connection
Application
Pumping of heating water (acc. to VDI 2035), chilled water and water/glycol mixtures without abrasive substances in heating, chilled water and cooling systems.
Features/Product Advantages
- 1.High standard of corrosion protection thanks to cataphoretic coating
- 2.Standard condensate drainage holes in the motor housings and lanterns
- 3.Series design: motor with one-piece shaft
- 4.Version N: Standard motor V1 with stainless steel plug shaft
- 5.Bidirectional, force-flushed mechanical seal
Technical data
1.Permissible temperature range -20 °C to +120 °C
2.Mains connection 3~400 V, 50 Hz (others on request)
3.Protection class IP 55
4.Nominal diameter Rp 1 to DN 100
5.Max. operating pressure 10 bar (special version: 16 bar)
Materials
1.Pump housing and lantern: EN-GJL-250
2.Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type)
3.Shaft: 1.4021
4.Mechanical seal: AQEGG; other mechanical seals on request
Construction
Single-stage, low-pressure centrifugal pump in in-line design with
1.Mechanical seal
2.Flange connection with pressure measuring connection R 1/8
3.Motor with one-piece shaft
