Wi-Fi 7 dual-band or tri-band Wireless Access Point with Qualcomm CPU
This is an Wi-Fi 7 ceiling wireless AP based on Qualcomm CPU.
Can be 2.4G+5G dual band, 3600Mbps data rate; 2.5G WAN Interface + 1G LAN Interface; 5dBi high gain antenna, 250+ users can access this wireless signal in 35 meters distance.
Can be 2.4G+5G+6G tri-band, 9300Mbps data rate, 2.5G WAN Interface+1G LAN Interface, 5dBi high gain antenna, 350+ users can access this wireless signal in 35 meters distance;
Firmware support cloud remotely management or cloud central management, IPv6, Mesh, 802.11kvr seamless roaming;
Optional to support SFP Fiber access or USB bluetooth.
| Hardware Spec: | |
| Model | KS-AP723Q Dual Band KS-AP739Q Tri-band |
| WiFi Standard | IEEE 802.11b/g/n/ac/ax/bt |
| CPU | IPQ5312 +1* QCA8081+1*QCA8033 + QCN6402+QCN6412 |
| Flash | 128MB_SPI_ nand Flash |
| Memory | 512MB DDR4 |
| Frequency | 2.4G: 2400 - 2484MHz |
| 5.8G: 5150 - 5850MHz | |
| 6G:5925-7125MHz | |
| Data Rate | 688Mbps @ 2.4GHz;2882Mbps @5.8GHz;5764Mbps @ 6GHz 2.4G 2x2 40MHz 5.8G 2x2 160MHz, 6G: 2x2 320MHz, MU-MIMO |
| RF Power | 2.4G≤20 dbm/chain 5.8G≤22 dbm/chain 6G≤22 dbm/chain |
| Access Users | 2.4G: 128 5.8G:128 6G:128 |
| Ethernet | 1*2.5G WAN, IEEE 802.3at PoE |
| 1*1G LAN | |
| 1*USB port, optional | |
| 1*SFP port, optional | |
| Button | Reset button |
| LED Indicator | SYS (Green) |
| 2.4G(Green) | |
| 5.8G (Green) | |
| 6G (Green) | |
| Antenna | 5dBi |
| Power Consumption | <25W |
| DC Power Supply | Input 12V / 2A (DC); 2.5GE/PoE, IEEE 802.3at standard |
| Working temperature | Working Temperature:-20ºC~45ºC |
| Storage temperature: -40ºC~70ºC | |
| Humidity | 5%~95% |
| Dimensions | |
1. Gift box + Carton box for finished product
2. POP bag+carton box for SKD;
1. High Quality: mostly materials are from famous brand company, longer lifetime; We can provide 2 years warranty for our products;
2. OEM & ODM: 15 years experience in the OEM & ODM;
Provide strong technical support in hardware and firmware;
Firmware can support OpenWRT.
2 years warranty
Q1. OEM & ODM service
A: OEM: provide your LOGO to us, we can add your LOGO on the product, firmware and package;
Content will be limited by MOQ;
ODM: we can provide PCBA, housing and firmware ODM service:
PCBA: 3 month, from EVT to DVT;
Housing: 1 month design, 2 month in tooling
Firmware: we can provide the open source driver for customer to develop their firmware;
We can provide DTS files if want;
And we can provide technical support in customer firmware development.
Q2. If support out of China production:
A. Yes, this is developed by our engineers, we can support SKD and CKD;
We can provide the SOP of assemble and finished product testing;
But for the CKD, 1st you can do the RF calibration, 2nd you should have engineer to debug the problem;
We can provide SOP or all documents, and we can send engineers to provide technical support, but will be costly.
