Analog Series
Professional Amplifier
KTV System
Professional
Transistor Amplifier
Post Amplifier, Amplifier Combined
1CH,2CH,4CH
4
AC:160-242V
Push-Pull Amplifier
Class H,Class D
Customized
Designed by Customers
OEM or ODM
Copper Winding
Complete
Sunhyor
Standard Export Carton
customized
Dongguan, China
851840009
Product Description
Wholesale Pro pa Audio-Sets Powered Amp Sound Stage Equipment Speaker Stereo Ca Series Consumer Electronics Professional PA System Tube Power Audio Amplifier
Dongguan Sunhyor Audio Technology Co., Ltd. is located in the Dongguan Audio Industry Belt. It is a manufacturer that integrates professional power amplifier design, research and development, production, and sales. The main products include mono, dual channel and multi-channel digital and analog audio amplifiers, amplifier modules, intelligent power sequencer etc. The product is widely used in Theatres, KTV , bars, churches, schools, outdoor stage...... Currently,our main brand is SUNHYOR, supports OEM and ODM.Sunhyor Audio adheres to the development orientation of technological innovation, takes product quality as the foundation and takes integrity and pragmatism as the principle of conduct. Sincerely, we invite friends from all over the world to cooperate with us for a win-win business.
Pure Copper Toroidal Transformer
Adopt high power pure copper wire delivery a steady power to the amp to guarantee the amp to work stably for a long time .
Adopt high power pure copper wire delivery a steady power to the amp to guarantee the amp to work stably for a long time .
Large Capacity Filter Capacitor
8PCS large capacity original filter capacitors
Release peak sound quality
8PCS large capacity original filter capacitors
Release peak sound quality
Cooling Fan System
4PCS built-in cooling fans front & rear heat dissipation effectively prolong the service life of key components
4PCS built-in cooling fans front & rear heat dissipation effectively prolong the service life of key components
Features
1.Class H circuit amplifier;
2.100% copper toroidal transformer;
3.Import On-Semi transistors;
4.Tunnel type heat dissipation system;
5.Overall protection against overload,overheat,short circuit ,DC and distortion limiter;
1.Class H circuit amplifier;
2.100% copper toroidal transformer;
3.Import On-Semi transistors;
4.Tunnel type heat dissipation system;
5.Overall protection against overload,overheat,short circuit ,DC and distortion limiter;
| Model | MD-5064 | MD-5084 | MD-5104 | Customized | |
| Channel number | 4 | 4 | 4 | Logo | |
| Rated output power | Stereo power 8Ω | 4*600W | 4*800W | 4*1000W | Power |
| Stereo power 4Ω | 4*900W | 4*1200W | 2*1500W | Package | |
| Rated bridged output power 8Ω | 2*1500W | 2*2200W | 2*2700W | Pannel | |
| Power supply | AC 220-240V 50Hz/60Hz (100V-125V can be customized) | ||||
| Total harmony distoration(THD) | <0.025% | ||||
| Frequency response | 20Hz-20KHz,±0.5dB | ||||
| Signal to noise | >110dB | ||||
| Slew rate | >80V/us | ||||
| Damping factor | >800:1 | ||||
| IMD | <0.05% | ||||
| Input sensitivity(*40/32dB) | 0.775V/1.4V(32dB) | ||||
| Input impedance | 20k ohms balance/10k ohms unbalance | ||||
| Protection | Full-featured protection circuit, including temperature (overheating), short circuit, DC, voltage limit, overload, overcurrent, distortion limiter, undervoltage/overvoltage, on/off noise, load mismatch (low resistance), soft-start on boot, Power-on anti-surge, radio interference, secondary wave, high-frequency output automatic detection (UHF) protection and other protections | ||||
| Cooling system | By the air convection mechanism from the front to the rear, the internal air is forced to dissipate heat, and the automatic continuously variable speed dual fans are forced to cool | ||||
| Output circuit type | Class H | ||||
| Gross Weight | 15.11Kg | 19.75Kg | 23.85Kg | customized | |
| Dimensions(L*D*H) | 483*350*88mm | ||||
| Remark:Above standard parameters are just for your reference,we can design by your requirements. | |||||
Before Sale Service
1.Your inquiry of our products will be reply in 24 hours.
2.We will provide you with newest quotation and the specific product specifications.
3.Good quality product,quick delivery time,competitive price,strong packing.
4.We have good translations,enthusiastic sales and service who can speak fluently in English.
5.Our engineers have R&D experiences and have strong abillty to do ODM projects.
6.Every products will be checked well in order to ensure the high quality.
After Sale service
1.Updated the shipping information as soon as possible.
2.Ensure the products delivery on time.
3.Documents will be send correctly and promptly.
1.Q:Can I get a sample before placing trial order?
A:Sure,you can.Please contact our sales representative for more details.2.Q:What's your delivery time?
A:It depends on your order quantity.
Normally,for samples,it takes about 5-7 days;for mass production,it takes about 25-30 days after receiving your deposit.
3.Q:What's your price terms?
A:EXW,FOB,CFR,CIF etc are available.
4.Q:What about your payment terms?
A:TT 30% deposit in advance and balance 70% will be paid off before delivery.
5.Q:Is it support to print my logo on the label?
A:No problems,we can make it as per your requirements.
As the professional manufacturer of analog and digital power amplifier in China,we can offer you a wide range of 200 watt to 6000 watt with 2channel and 4 channels.Our amp has an enough power.
Also,we can offer customized items based on your requirements. Feel free to contact us!
