SMP-1000-3
/
/
Finished
E0
Engineered Veneer
Spc
KOJO
Carton/Pallet
2.2m
Anhui, China
3925200000
Product Description
Almost all of us have a knowledge of the "SPC" and "Door Skin",however only few of us have learned the SPC Door Skin.Today let's have a look at KOJO's new product SPC Door Skin.
KOJO SPC door skin is produced by mixing and condensing selected polymer resin powder, calcium powder, and more than ten kinds of environmental protection additives. It is fused by high-temperature hot-melt polymer, and is extruded and air-cooled by die to form it. According to the gold molar ratio formula, the physical properties such as strength, hardness, weather resistance, and stability are significantly improved.
Compared the comment doors like WPC door skin ,MDF door skin,and other wood-base panels, KOJO SPC door skins have some superior features as in the below chart:
Below are the characteristics of KOJO SPC Door Skin
1.High hardness
surface shore hardness up to 70 degree, 23% higher than traditional door skin.
2.Good impact resistance
The impact strength exceeds 10KJ/m², which is 50% higher than the traditional door skin.
3.Extrusion+Lamination,two processes at a time
The door skin can be laminated both online and offline,and can be painted as well
4.Environmentally-friendly,waterproof,flame,retardant
·Environmental standard:Enf
·Fire retardant grade:B1
·Waterproof
·Mildew
·Insect resistant
5.Highly Cost Effective
KOJO adamantine door skin costs less but
KOJO SPC door skin is produced by mixing and condensing selected polymer resin powder, calcium powder, and more than ten kinds of environmental protection additives. It is fused by high-temperature hot-melt polymer, and is extruded and air-cooled by die to form it. According to the gold molar ratio formula, the physical properties such as strength, hardness, weather resistance, and stability are significantly improved.
Compared the comment doors like WPC door skin ,MDF door skin,and other wood-base panels, KOJO SPC door skins have some superior features as in the below chart:
| Items | 3.5mm Thick WPC door skin | 2.5mm Thick SPC door skin | 3.0 mm Thick SPC door skin | International standard | Wood-base Panels | |
| Shore hardness(HD) | 57 | 70 | 72 | ≥55 | 70 | |
| Formaldehyde Emission(g/m³ ) | 0.03 | 0.02 | 0.02 | E0<=0.124 | E0<=0.124 | |
| Extractable Metal Content | 0 | 0 | 0 | <=60 | <=60 | |
| Vicat Temperature(ºC) | 68 | 80 | 81 | / | / | |
| Moisture content(%) | 0.29 | 0.06 | 0.04 | <=2 | 5-11 | |
| Water absorption(%) | 0.62 | 0.04 | 0.08 | / | 20 | |
| Bending strength(MPa) | 17.4 | 30 | 31 | ≥20 | / | |
| Modulus of Elasticity(MPa) | 1816 | 5000 | 6000 | ≥1800 | / | |
| Impact strength(KJ/m²) | 7.0 | 10.5 | 10.6 | / | 6-15 | |
| Flame retardation | B1 | B1 | B1 | / | B2-B3 | |
| Thickness swelling rate(%) | 0.14 | 0 | 0 | <=0.5 | 5-8 | |
| Dimensional stability(%) | Length | 0.95 | 0 | 0.01 | <=1.5 | 0.2-0.4 |
| Width | 0.13 | 0.01 | 0.01 | <=1.5 | 0.2-0.4 | |
| 0-60ºC linear expansion coefficient (10-6ºC-1) | Length | 26 | 31 | 26 | / | / |
| Width | 60 | 34 | 31 | / | / | |
1.High hardness
surface shore hardness up to 70 degree, 23% higher than traditional door skin.
2.Good impact resistance
The impact strength exceeds 10KJ/m², which is 50% higher than the traditional door skin.
3.Extrusion+Lamination,two processes at a time
The door skin can be laminated both online and offline,and can be painted as well
4.Environmentally-friendly,waterproof,flame,retardant
·Environmental standard:Enf
·Fire retardant grade:B1
·Waterproof
·Mildew
·Insect resistant
5.Highly Cost Effective
KOJO adamantine door skin costs less but
