Vibration tuning fork level switch liquid water oil tank level sensor SPDP PNP relay output
Product description:
Tuning fork level switch is a kind of new control switch, which is mainly depend on the tuning fork through
the vibration principle to measure the level of material. Through the installation of the tuning fork on the
base of the tuning fork vibration of a piezoelectric crystal in the resonance frequency. When the tuning
fork and the medium contact, tuning fork frequency and amplitude changes, these changes are detected
by the intelligent circuit, and converts it into a switch signal.
Technical Parameters
medium temperature range | -20 ° C to 220 ° C |
ambient temperature | -20 ° C to 80 ° C |
ambient humidity | ≤ 95% RH |
measured medium | liquid, powder or granular solid |
measured medium density | solid ≥ 0.1g/cm3, liquid ≥ 0.7g/cm3 |
measured solid particle size | ≤ 10mm |
maximum liquid viscosity | <1000mm2 / s
|
measured medium repose angle | ≥ 200 |
pressure range | ≤ 1MPa |
shell material | die-casting aluminum alloy |
fork material | 1Cr18Ni9Ti |
shell protection | IP65 |
connection |
1 "NPT thread / flange (two ways) |
electrical parameters | 1: supply voltage: 24 V DC; 220V AC 50Hz 2: output signal: relay output double-pole double- throw (DPDT) contact capacity: 8A 220V AC 4A 24V DC 3: power consumption: ≤ 2W |
tuning fork vibration frequency | 300 ± 500HZ |
Tuning Fork Switch Ordering Information Sheet
Model | Name |
AFTL | Tuning Fork Switch |
Code | Power Supply |
1 | 220V AC |
2 | 24V DC |
Code | Temperature Type |
H | High Temperature Type |
S | Common Type |
Code | Fork Sort |
A | Standard Type |
C | Shock Rod Type |
S | Compact Type |
Code | Fork Type and Insertion Dept h Range |
G1 | Small Fork 45mm~3000mm |
G2 | Standard Fork 100mm~3000mm |
Code | Process Connection/Material |
N1 | 1″ NPT thread/316ss |
G1 | G1″ thread/316ss |
D25 | DN25 PN4.0MPa/316ss |
D40 | DN40 PN4.0MPa/316ss |
D50 | DN50 PN4.0MPa/316ss |
TC1 | 1″ Clamp/316ss |
TC2 | 2″ Clamp/316ss |
Code | Shell/Cable Interface Size |
A1 | Die-cast Aluminum Shell Explosion-proof IP67/NPT 3/4″ |
A2 | 316ss Shell Explosion-proof IP67/M20X1.5 |
Customers Supply | Insertion Length |
Product details:
Installation:
Yantai Auto Instrument Making Co., Ltd has advanced production equipment and highprecision
import calibration equipment , it is a hightech enterprise integrating product design , research and
development , production and sales . Widely used in environment protection , power , petrochemical ,
metallurgy ,electric power , pharmaceutical ,food and other industries . Products are exported to more
than 60 countries and regions such as the United states , Germany , Russia , India , Vietnam , South
Korea and Pakistan etc.
Main products
Pressure Instruments: pressure transmitter, differential pressure transmitter, level transmitter.
Flow Instruments: Vortex flow meter, electromagnetic flow meter, turbine flow meter, ultrasonic
flow meter, oval gear flow meter.
Level Instruments: Radar level meter, ultrasonic level meter, magnetic level gauge, level switch.
Certificate:
