Elt
None
None
None
Light Yellow
Liquid
Concrete Additives Foam Agent Cement Vesicant
High Quality Natural Plant Polymer
1.06
6.8-7.2
0.5%
≥40%
50
0.35-0.45
elite-indus
200kgs/Drum, 80drum, 16ton/20'gp
CE
Anhui
34021100
Product Description
Vegetable Protein Concrete Foaming Agent Liquid Type
1, Product Description:
concrete foaming agent is a material that facilitates formation of foam such as a surfactant or a blowing agent.
A surfactant, when present in small amounts, reduces surface tension of a liquid (reduces the work needed to create the foam)
or increases its colloidal stability by inhibiting coalescence of bubbles.
A blowing agent is a gas that forms the gaseous part of the foam.
2, Features:
1, Use high quality natural plant polymer materials as raw material
2, By complex chemical reactions generated
3, Light yellow pure transparent oily liquid
4, Not sensitive to hard water, non - toxic, tasteless, no sediment
5, PH value close to neutral, noncorrosive to cement and metal, environmental friendly
6, Easy to store, with excellent foaming performance, rich foam with moderate stability
3, Specifications:
4, Advantages:
1,Less consumption, low cost and stable quality, capacity of 200KG vesicant is 500m3 foam cement.
2,widely applied in heating and roof insulation engineering, significantly reduce the construction cost.
5,Method Of Use
6, Packing:
50KGS/DRUM 200KGS/DRUM 1000KGS/IBC TANK
1, Product Description:
concrete foaming agent is a material that facilitates formation of foam such as a surfactant or a blowing agent.
A surfactant, when present in small amounts, reduces surface tension of a liquid (reduces the work needed to create the foam)
or increases its colloidal stability by inhibiting coalescence of bubbles.
A blowing agent is a gas that forms the gaseous part of the foam.
2, Features:
1, Use high quality natural plant polymer materials as raw material
2, By complex chemical reactions generated
3, Light yellow pure transparent oily liquid
4, Not sensitive to hard water, non - toxic, tasteless, no sediment
5, PH value close to neutral, noncorrosive to cement and metal, environmental friendly
6, Easy to store, with excellent foaming performance, rich foam with moderate stability
3, Specifications:
| Parameter | Specs |
| Appearance | light yellow pure transparent oily liquid |
| Proportion(kg/L) | 1.06 |
| PH value | 6.8-7.2 |
| Content of inorganic salts | ≤0.5% |
| Rate of absorption | ≥40% |
| Hues (APHA) | ≤50 |
| Consumption (kg/m3) | 0.35-0.45 |
| Operating Temperature(°C) | ≥5 |
| Safety | Stable chemistry, non-poisonous, no flavor, non-inflammable |
4, Advantages:
1,Less consumption, low cost and stable quality, capacity of 200KG vesicant is 500m3 foam cement.
2,widely applied in heating and roof insulation engineering, significantly reduce the construction cost.
5,Method Of Use
| Oven-Density In KG/m3 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 | 2350 Conv.concr. | |
| Sand | KG | - | 210 | 400 | 560 | 750 | 950 | 1100 | 1950 |
| Cement | KG | 300 | 310 | 320 | 350 | 360 | 380 | 400 | 320 |
| Water in mortar | KG | 110 | 110 | 120 | 120 | 140 | 150 | 160 | 180 |
| Quantity of foam | Ltrs | 800 | 715 | 630 | 560 | 460 | 370 | 290 | - |
| Water in foam | KG | 64 | 57 | 50 | 45 | 37 | 30 | 23 | - |
| Wet Density | KG/m3 | 474 | 687 | 890 | 1075 | 1287 | 1510 | 1683 | 2400 |
| Foam Agent Use | KG | 1.5 | 1.4 | 1.2 | 1.1 | 0.9 | 0.7 | 0.6 | - |
| Water/Cement Ratio | 0.58 | 0.54 | 0.53 | 0.47 | 0.49 | 0.47 | 0.46 | 0.56 | |
| Max Strength in | N/mm2 | ~1 | ~2 | ~3 | ~4 | ~8 | ~12 | ~18 | 25+ |
| Average Lambda | W/m x K | 0.096 | 0.18 | 0.21 | 0.32 | 0.405 | 0.45 | 0.55 | 2.10 |
| (Achieved Strength at the lab with optimum sand cement qualities) More cement will increase strength. Using Lightweight aggregate in matrix of cell,concrete increases strength up to 500% in overall densities below 1000KG/m3 | |||||||||
6, Packing:
50KGS/DRUM 200KGS/DRUM 1000KGS/IBC TANK
