HG
Automatic
380V
Customized
1t/H-200t/H
Rock Salt, Sea Salt
Three Times Crushing, Four Times Washing
Stainless Steel
30*70m
Automatic
China
380V, 50Hz
HG
Wooden Case
IOS
Jiangsu
Product Description
1. High grade fine salt-making product has high-purity, the gloss outward appearance, the good free fluidity, stable including the iodine quantity.
2. Low loss, NaCL loses in 10% below
3. Low energy consumption
4. Simplify operation lowly and services
5. To pass through the commercialization production proof
The "Vacuum Evaporation technology, which is our representative technology, is the most advanced for producing refined salt in China.
The Vacuum Evaporation salt making system uses different evaporating degree of different material to achieve the salt refinery. It can make pure clean edible salt for human consumption.
The four evaporator will continuously and purify the salt into edible salt degree
The machines could be designed by the need of customers and their raw material.
range of ±0.2mm.The contact between scraper and drum should be even, the contact line will be not less than 80% of the whole length.There should not be bumping and abnormal noise when running. The outside shell of the drum should be treated by polishing.d by polishinxg.
2. Low loss, NaCL loses in 10% below
3. Low energy consumption
4. Simplify operation lowly and services
5. To pass through the commercialization production proof
The "Vacuum Evaporation technology, which is our representative technology, is the most advanced for producing refined salt in China.
The Vacuum Evaporation salt making system uses different evaporating degree of different material to achieve the salt refinery. It can make pure clean edible salt for human consumption.
The four evaporator will continuously and purify the salt into edible salt degree
| Technical data | |
| Purity | >98% |
| Power | 150kw |
| Capacity | 20000T/year |
| Labor | 10 |
| Material | stainless steel |
| Process method | vacuum type |
The machines could be designed by the need of customers and their raw material.
range of ±0.2mm.The contact between scraper and drum should be even, the contact line will be not less than 80% of the whole length.There should not be bumping and abnormal noise when running. The outside shell of the drum should be treated by polishing.d by polishinxg.
