HYUO
1 Year
AC 380V
CE, TUV, ISO
1 Year
±2.5%
Normal Pressure ~ 100kpa, Within 10 Minutes.
Room Temperature +20~200ºC
±0.3ºC
1.5ºC
5ºC/Min
HUANYI
Strong Wooden Case
Customized
China
9013809000
Product Description
VACUUM OVENS
The vacuum oven consists of a high vacuum pump, a box, a studio, an electric heater and a digital thermostat. It can work steadily under the set vacuum condition and is suitable for vacuum drying of medicine, chemical industry, electronics, appliances, materials and parts. The outer shell of the box is sprayed with cold binding plate, which is beautiful and pleasant to the eye. The inner box is treated by stainless steel plate welding and pressure-resisting technology, and is equipped with silica gel sealing cushion on the door to ensure air tightness in the box. Glass fiber insulation is adopted to provide high-efficiency insulation and save energy consumption. The heating plate is installed on the four sides of the inner box to ensure uniformity of temperature.
HUANYI manufactures multiple lab vacuum ovens that offer versatility and endurance with peak temperatures reaching 200°C. These vacuum ovens are designed to both reduce environmental pressure while adding heat conditioning and vacuum drying.
Vacuum ovens are designed for drying, curing, outgassing aging, process control and many other applications which require elevated temperature in reduced atmospheres. They can be incorporated into many commercial production processes. Lab vacuum ovens are designed to both reduce environmental pressure while adding heating conditioning and vacuum drying.
How do vacuum drying ovens work?
Vacuum drying ovens carefully dry materials without damaging them in the process. The drying chambers reduce the pressure on the material during the drying process, therefore the substance is able to dry at lower temperatures. This process is best for products that are sensitive to heat.
Contact us today to learn more about our products and services. Our knowledgeable team will help you find the right solution for your environmental testing needs.
| 1. Product description | |
| The low-pressure test chamber produced by our company is used for low-pressure testing of instruments, electrical and electronic products, materials, parts, and equipment to evaluate their storage and/or use under high-temperature, low-temperature, and low-pressure environmental conditions. Adaptability. | |
| 2. Sample restrictions | |
| This test chamber prohibits: | |
| Testing or storage of flammable, explosive and volatile substance samples Testing or storage of corrosive substance samples Testing or storage of biological specimens Testing or storage of samples from strong electromagnetic emission sources | |
| 3. Cabinet specifications | |
| 1. Studio size | W1200mm×D600mm×H600mm (depth×width×height); |
| 2. Air pressure deviation | ±2.5% |
| 3. Vacuuming rate | Normal pressure ~ 100kPa, within 10 minutes. |
| 4. The outer dimensions are subject to the actual object. | |
| 5. Equipped with a tempered glass window, allowing you to know the status of the products in the box at any time; | |
| 6. It is divided into two layers, with two grids and stainless steel mesh, which can be taken out freely; | |
| 4. Temperature | |
| 1. Temperature range | room temperature +20~200ºC |
| 2. Temperature fluctuation | ±0.3ºC |
| 3. Temperature change | 1.5ºC |
| 4. Heating rate change | 5ºC/min |
| 5. Material | |
| 1. Inner Chamber material | The inner box is made of SUS#304 stainless steel plate with a thickness of 5mm. Add concave force bone reinforcement to prevent the deformation of the test chamber. |
| 2. Outer Chamber material | The exterior is made of SS41#1.2t steel plate, which is anti-rust treated and then painted with anti-static paint in ivory white. |
| 3. Insulation material | Imported stone rock insulation cotton with strong thermal insulation performance is used. The insulation thickness is 80mm. |
| 6. Sealing and vacuum display | |
| 5.1. The vacuum operation has the functions of pumping, stopping, and decompressing, with electrical control mode and automatic control of the vacuuming process; | |
| 5.2. Automatic control: Set the required vacuum value and start the vacuuming screen. When the vacuum reaches the set upper limit, the vacuum pump stops working. At this time, it enters the pressure maintaining stage and starts timing. When the vacuum degree is lower than the lower limit, the vacuum pump starts working. , when the pressure holding time is over, the alarm prompts automatic decompression; | |
| 5.3. The sealing is a silicone sealing strip to ensure the sealing of the whole machine; | |
| 5.4. The digital display vacuum gauge shows that the vacuum unit is Kpa, and the vacuum degree range is: 0~100Kpa; | |
| 5.5. Vacuum degree: -100Kpa, | |
| 5.6. Pumping speed: normal pressure 0-100pa, within ten minutes. | |
| 5.7. Pressure deviation: ±0.5KPa, | |
| 5.8. Vacuum leakage rate: 1KPa ≤/hour. | |
| 5.9. Equipped with 1 2-liter direct-connected vacuum pump, single box independent control; | |
| 7. Protection system | |
| 1. The PID microcomputer automatic temperature controller used by our company can alarm the over-temperature problem of the machine studio and stop the power output by setting the internal upper and lower temperature limits to protect the products in the machine from over-temperature. and cause unnecessary losses. | |
| 2. Over-temperature protection system: When the temperature is out of control due to external forces, this system will automatically stop heating and power supply when it exceeds the set temperature by 10 degrees, thereby protecting the safety of your products and machines. | |
| 3. Overload protection system: When the power of the whole machine exceeds the normal power due to excessive external voltage or other reasons, this system will automatically cut off the power to protect the industrial control components of the whole machine from damage. | |
| 8. Vacuum system | |
| The door and the inner tank are sealed by silicone rubber strips. There is an air extraction hole at the rear of the working room, which is connected to the vacuum pump, pressure sensor, air inlet solenoid valve, vacuum pressure port on the panel and manual regulating valve at the rear base through pipelines. | |
| The pressure sensor signal is sent to the smart instrument to display the absolute air pressure in the box. The vacuum pressure hole is used for pressure measurement and sampling. Before stopping the machine and opening the door, the air inlet solenoid valve must be opened to inlet air to balance the air pressure inside and outside the box before the door can be opened. | |
| 9. Machine power supply | |
| Voltage 220V Power 3KW | |
| 10. Quality assurance system | |
| In order to further improve the company's products and company management levels, and provide users with world-class environmental testing equipment of high brand, high quality, high efficiency and high service, the company operates in strict accordance with the quality assurance system of the IS09001: 2015 version standard. The product needs to undergo nearly a week of quality inspection in the quality department before leaving the factory: training will also be provided to users during on-site commissioning to ensure the quality of the product and the interests of users. | |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
