ISO
Unknown
Thermo Forming
Automatic
KCM
Wharf Container
Chuzhou, Anhui, China
Product Description
Components:
Process:
Specifications:
Forming Area Dimensions: 1900 X 900mm;
Maximum Forming Depth: 650mm;
Maximum Power Consumption: 400KW(3-phase 380V);
Maximum Heating Power: About 160KW(3-phase);
Cyclic Process Time: 50s/set, based on the thickness of 3.5mm ABS sheet;
40s/set, based on the thickness of 2.0mm ABS sheet;
Compressed Air Source: 1½" (0.5-0.65Mpa)
Tap water: 2T/H
Sheet Thickness: 3.0-5.0mm
Material: ABS, PS or HIPS
- Pre-heating;
- Heating Part;
- Forming Machine;
- Spiked Chain Transmission System;
- Unloading Part with Auto Picking and Slowdown;
- Hydraulic Pressure System;
- Pneumatic System;
- Vacuum System;
- Cooling System;
- Mold Heating System;
- Electrical Control System;
- Trimming Machine(For finishing to cut off peripheral sides of inner line);
Process:
- Put the original board on the workbench of the loading station in preset order manually;
- The board is moved by workbench to the board loading position;
- Automatically pick up the board and move the board to the Transmission part;
- The board is sent in the Heating Station on time;
- The heated plate is shifted to the Vacuum Forming Station;
- The cylinder pushes the medium mold holder downward and presses the board;
- Blow the air to the board;
- The forming die moves upward to the right position;
- The board is vacuumed and sucked to the forming die;
- The upper mold holder moves down to the right position and presses the board;
- The cooling device cools down the formed piece;
- Demoulding;
- The upper mold holder is up;
- The forming die goes down;
- The medium mold holder moves upward;
- The formed piece is positioned to the unloading station;
- Unload the piece;
- Take the piece out in manual.
Specifications:
Forming Area Dimensions: 1900 X 900mm;
Maximum Forming Depth: 650mm;
Maximum Power Consumption: 400KW(3-phase 380V);
Maximum Heating Power: About 160KW(3-phase);
Cyclic Process Time: 50s/set, based on the thickness of 3.5mm ABS sheet;
40s/set, based on the thickness of 2.0mm ABS sheet;
Compressed Air Source: 1½" (0.5-0.65Mpa)
Tap water: 2T/H
Sheet Thickness: 3.0-5.0mm
Material: ABS, PS or HIPS
