Typical Product Description
- Medium viscosity, medium reactivity.
- Superior surface cosmetics.
- Reduced shrinkage.
- Fast wetting out.
- Reduced glass fiber print.
- Low styrene emission version available.
Application
- Molding: hand lay-up, filament winding,spray-up.
- Final products: water tank,automotive parts,cooling tower cover,nacelle covers,pipe,boats etc industrial parts.
Package
220kg or 1000kg
Shelf life
- 3months under 25ºC,away from heat sources, direct sunlight or steam pipes,rain etc.
- Keep sealed to prevent moisture pick-up and monomer loss.
Liquid resin characteristics
| Item | Value |
| Appearance | Slight yellow |
| Specific gravity at 25ºC | 1.05 -1.10 g/cm3 |
| Viscosity at 25ºC | 400 - 600 mPa.s |
| Solid content | 55.0 - 65.0 % |
| Thixotropic index | 2.5 - 3.5 |
| Gel time | 20 - 60mins are available |
Typical physical properties of casting resin
| Item | Value | Testing method |
| Barcol hardness | 42 | GB/T 3854 |
| Tensile strength | 70MPa | GB/T2568 |
| Tensile modulus | 3.5GPa | GB/T2568 |
| Tensile elongation | 2.0% | GB/T2568 |
| Flexural strength | 94MPa | GB/T 2570 |
| Flexural modulus | 3.9GPa | GB/T 2570 |
| HDT | 76ºC | GB/T 1634 |
Other relative products information for general purpose
| Product type | Description |
| Ortho | Widely use. |
| Ortho blending | High solid content, low print-out, Low shrinkage |
| ISO | High physical property, good water/weather resistance |
| ISO blending | Good water/weather resistance, low shrinkage |
| TPA | Excellent water/weather resistance, High impact. |
| VER | Chemical resistance.Has |
| VER blending | Fast cured ,low shrinkage |
| Ortho blending | Bond ABS,PVC and PMMA with FRP |
Part products hold CCS approved version for marine application.
Safety attention
- Resin solutions contain volatile and flammable monomers such as styrene(flash point : 31ºC)
- The resin should be handled and used in well ventilated, flame proof areas
-To wear gloves and goggles to guard against any skin/ eye irritation arising from the presence of styrene. Under no circumstances must accelerators be mixed with peroxide catalysts as it can cause explosions.
- Transportation should according to the State Council "Chemistry Dangerous Articles Safety Management Regulations" due to it contains styrene monomer.
inflammable.
We focus on composites resin business and have a tolling plant in Changzhou city. We can supply all kinds of modified resin to feed up your solutions for composites. The business covers the total composites industry.
Q1:Do you provide sample for the trial?
A1:We could supply small size package for free.but we have to charge the freight.
Q2.Could you supply customized products friendly?
A2: Yes,we do.We have a team to sever in Fortune 500 and be able to supply products to satisfied with the end-users' technical requirement.
Q3. What about your lead time?
A3: Generally 2-4weeks after the order confirmed.
Q4. What are your terms of payment?
A4:Usually we do EXW, FOB, CIF, and DDP.
