FCB-3
12 Months
12 Months
4000L
Jarlo
Bulk
7795x1900x2275mm
China
8428909090
Product Description
FCB-3 Mining diesel engine explosive equipment transportation truck
1. Using American DANA wet multi-disc brakes and dual-circuit braking system to effectively ensure braking safety.
2. The closed cab adopts ergonomic design, meets FOPS/ROPS (anti-smash/anti-rollover) standards, and is equipped with air conditioning, which improves driving comfort-ability.
3. The frame adopts post-weld annealing treatment and shot blasting treatment to eliminate welding stress and ensure the quality of the whole machine.
4. The main purchased accessories are from well-known domestic brands, which can ensure the normal operation of the equipment, low failure rate and equipment maintenance frequency.
5. The chassis is equipped with a quick-change mechanism, allowing one machine to be used for multiple purposes.
6. Use the imported brand Cummins high-pressure common rail water-cooled engine, which has low emissions, good fuel economy, and can provide excellent Gradeability and power performance.
Main configuration and technical parameters
Main performance characteristics
| Item | Unit | Parameters | |
| Overall size | L | mm | 7640 |
| W | mm | 1900 | |
| H | mm | 2370 | |
| Total Mass | kg | 8500±300 | |
| Largest traction | kN | ≥80 | |
| Min. Ground clearance | mm | 250 | |
| Gradeability (Heavy loaded) | % | 25 | |
| Steering angle | (º) | ±40 | |
| Lateral swing angle | (º) | ±6~8 | |
| Wheelbase | mm | 1530 | |
| axle track | mm | 3500 | |
| Turning radius | Inner | mm | 3850 |
| Outer | mm | 5850 | |
| Max. Driving speed | Gear I | km/h | 6 |
| Gear II | km/h | 12 | |
| Gear III | km/h | 20 | |
| Diesel engine | CumminsB3.9CS4130C,96kW/2500rpm,National 4 | ||
| Dynamite cabin load capacity | Kg | 3000 | |
| Dynamite cabin size | L | mm | 3200 |
| W | mm | 1700 | |
| H | mm | 1160 | |
Main performance characteristics
2. The closed cab adopts ergonomic design, meets FOPS/ROPS (anti-smash/anti-rollover) standards, and is equipped with air conditioning, which improves driving comfort-ability.
3. The frame adopts post-weld annealing treatment and shot blasting treatment to eliminate welding stress and ensure the quality of the whole machine.
4. The main purchased accessories are from well-known domestic brands, which can ensure the normal operation of the equipment, low failure rate and equipment maintenance frequency.
5. The chassis is equipped with a quick-change mechanism, allowing one machine to be used for multiple purposes.
6. Use the imported brand Cummins high-pressure common rail water-cooled engine, which has low emissions, good fuel economy, and can provide excellent Gradeability and power performance.
