ZH
Mechanical
Single Control Switch
Control Switch
Home, Commercial, Industrial, Vehicles
Non Explosion-proof
Normally Close
Type a Contact
Jpci
ISO9001, CE
Single Item
1A
0.060kg
250V
Yes
90kpa
Ultimheat
2.5X3.4X1.5. cm
Guangdong, China
8536500090
Product Description
Electronic printed circuits. Detection of low positive, negative or differential pressure. Measurement of liquid levels, air flow, filters efficiency. Very small differential, about 0.2 kPa (2 mbar, 0.03 PSI)
Membranes: Silicone, dia 22mm.
Fluid: Air only
Fitting: Two plastic spouts dia 4mm for soft PVC tube 3 × 6mm (⅛")
Pressure: Differential
Housing: PA66
Contact: Single pole normally open, slow make and break.
Electrical rating:
- Silver contact: max 1A 250VAC resistive
- Gold plated contact: max 100 mA, 24VDC
Action: Momentary, close by pressure rise on positive pressure inlet
Set point calibration: Factory calibrated and sealed
Set point calibration limits: From -/+1 to -/+60 kPa (-/+ 10 to -/+ 600 mbar, -/+0.15 to -/+9 PSI)
Differential: Less than 0.5 kPa (5 mbar, 0.07 PSI)
Electrical connection: printed circuit terminal, dia. 1mm, 12.5mm distance
Maximum operating pressure: -/+ 90kPa(-/+ 900mbar, -/+ 13PSI)
Bursting pressure: > 4bar (0.4Mpa, 60PSI)
Ambient temperature limits: Air: -10 ~ 85°C (14 to 185°F)
Note: 10 kPa= 100 millibars = 1.45 PSI= 40 inches of water = 1016mm of water.
Membranes: Silicone, dia 22mm.
Fluid: Air only
Fitting: Two plastic spouts dia 4mm for soft PVC tube 3 × 6mm (⅛")
Pressure: Differential
Housing: PA66
Contact: Single pole normally open, slow make and break.
Electrical rating:
- Silver contact: max 1A 250VAC resistive
- Gold plated contact: max 100 mA, 24VDC
Action: Momentary, close by pressure rise on positive pressure inlet
Set point calibration: Factory calibrated and sealed
Set point calibration limits: From -/+1 to -/+60 kPa (-/+ 10 to -/+ 600 mbar, -/+0.15 to -/+9 PSI)
Differential: Less than 0.5 kPa (5 mbar, 0.07 PSI)
Electrical connection: printed circuit terminal, dia. 1mm, 12.5mm distance
Maximum operating pressure: -/+ 90kPa(-/+ 900mbar, -/+ 13PSI)
Bursting pressure: > 4bar (0.4Mpa, 60PSI)
Ambient temperature limits: Air: -10 ~ 85°C (14 to 185°F)
Note: 10 kPa= 100 millibars = 1.45 PSI= 40 inches of water = 1016mm of water.
Calibration | Silver contact | |||
20 kPa (200 mbar, 2.90 PSI) | ZH2X25T10B000000 | |||
JPCI Controls originated from the French family-owned company founded in 1972, our company was founded in 2000, headquartered in Gaoming District, Foshan City, Guangdong Province, China, which is specialized in the design and production of mechanical thermostats, safety devices and electric heating systems for domestic and industrial use. JPCI owns an internationally renowned brand, ULTIMHEAT, and has a subsidiary in Lyon, France.After more than 50 years of development, JPCI has become a research and development enterprise which is deeply exploring the international market.
JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.
JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.
JPCI Controls covers an area of 30,000 square meters, has more than 300 employees, including 30 professional R & D and laboratory employees, and produces more than 6 million products per year, with more than 10,000 product models. Our production has achieved full vertical integration to ensure quality control at each stage, our company has more than 1000 sets of testing equipment such as ultraviolet aging testing machine, motor loading machine, hydraulic hi-pot bursting testing machine to strictly monitor product quality.
JPCI Controls has always adhered to the values of innovation, listening, responding and continuous improvement to ensure that products can achieve the best quality. JPCI holds 250 patents and applies for an average of 20 patents per year. Won the national high-tech enterprises and passed the system certification ISO9001, ISO14001, ISO45001; It has a 750 self-built laboratory and has passed the ISO17025 laboratory certification of TUV&UL.
JPCI Controls is driven by innovation, guaranteed by quality, and takes environmental protection as its responsibilitylooking forward to working with you to create a better future.
