UC-AP
Rectangle
Resistance Strain
USB Connection
Analog Type
Corrosion Resistant
Integration
Stainless Steel
IP68
CE
Customized
2.5m
2.0+-0.02%Mv/V
1000m+/-2 Ohm
1030+/-10 Ohm
SUMMIT
CTN
42.5X40X18.5cm
China
8431310090
Product Description
UC-AP USB 800kg aerometal contruction rectangle elevator cabin mounting compression load cell
Rated load :800kg rectangle under elevator cabin mounting compression load cell
Description:
SUMMIT Elevator Cabin load cell sensors UC-AP are supplied with their own integral silent-block rubber mounting arrangement to avoid vibration transmission, and specifically designed for installation below the elevator & lift car. They easily mount under the cab and are extremely accurate, The UC-AP series load cell sensor are designed for use with new passenger lift up to 3200kg load (4pcs) in parallal.
Note: Under cab sensors UC-AP series are not recommended for lift modernization or retrofit.
Features:
Anodised aluminium construction
Up to 4x800kg: 3200kg load (4 sensors)
High accuracy,USB interface or plug
Individual sensor can be replaced
Perfect for new installations
Load cell for installation under elevator cabin.
Mounted on a silent-block pad that avoids the transfer of vibrations .
Connected to the unit control of the OMS-560 series and able to install a quantity of 4 cells in parallel, and max up to 8pcs load cell UC-AP
Adjustable locking screw to adjust the unevenness of the bottom of the car during assembly
Rated load :800kg rectangle under elevator cabin mounting compression load cell
Description:
SUMMIT Elevator Cabin load cell sensors UC-AP are supplied with their own integral silent-block rubber mounting arrangement to avoid vibration transmission, and specifically designed for installation below the elevator & lift car. They easily mount under the cab and are extremely accurate, The UC-AP series load cell sensor are designed for use with new passenger lift up to 3200kg load (4pcs) in parallal.
Note: Under cab sensors UC-AP series are not recommended for lift modernization or retrofit.
Features:
Anodised aluminium construction
Up to 4x800kg: 3200kg load (4 sensors)
High accuracy,USB interface or plug
Individual sensor can be replaced
Perfect for new installations
Load cell for installation under elevator cabin.
Mounted on a silent-block pad that avoids the transfer of vibrations .
Connected to the unit control of the OMS-560 series and able to install a quantity of 4 cells in parallel, and max up to 8pcs load cell UC-AP
Adjustable locking screw to adjust the unevenness of the bottom of the car during assembly
| Model | UC-AP | ||||
| Range | 800KG | ||||
| Rated Output | 2.0±0.02%mV/V | ||||
| Excitation Voltage | ≤15VDC | ||||
| Input Impedance | 1030±10Ω | ||||
| Out Impedance | 1000±2Ω | ||||
| Insulation Impedance | ≥5000MΩ | ||||
| Safe Overload | 150%F.S | ||||
| Ultimate Overload | 200%F.S | ||||
| Error | ±0.5%F.S | ||||
| Repeatability | ±0.5%F.S | ||||
| Null Balance | ±1%F.S | ||||
| Product Creep | ±0.05%F.S/30min | ||||
| Temperature Effect | ±0.02%F.S/10ºC | ||||
| Opperation Temperature | -30~70ºC | ||||
| Material | Aerometal | ||||
| Protect Class | IP67/IP68 | ||||
| Cable Length | 2.5M |
