1. Application:
Two Wires Al Rod Breakdown Machine is used for drawing two Alloy and Alloy alloy rod from 9.5mm to 2.2-5.0mm.
Outlet wire can go to dual take up device or compact coiler.
2.Main feature:
1)Individual drives
2)Inlet wire: 9.5mm, outlet wire: 2.2~5.0mm
3)Type: 11 dies
3-Parameters:
| Machine Type | LSD450/11-2 | |
| Drawing Wire No. | 2 Wires | |
| Drawing Capstan Dia. (mm) | φ450 | |
| Max. Die No. | 11 * 2 | |
| Inlet Dia. (mm) | AL, Al Alloy | 2 * φ9.5 |
| Outlet Dia. (mm) | AL, Al Alloy | 2*φ2.2~φ5.0 |
| Max. Drawing Speed (m/s) | 25 | |
| Main Motor (KW) | 45 / 55 / 75 /132 KW (AC) | |
| Capstan Arrangement | Horizontal Type | |
| Take-up Type (Optional) | Double Take-up/Single Take-up/ Coiler | |
4-Advantage:
1)Every drum is run by single motor with drivers.
2)Two wires produce at the same time to ensure high production capacity.
3)Energy saving, space saving.
4)Door up and down automatically make threading easily.
5)Tension rate can be adjustable according to different raw material.
6)Quick die change system.
7)Full immersion guarantee the wire's cooling and lubrication.
8)Drum box body is separated with transmit part, mechanical labyrinth seal type, to avoid drawing oil and gear oil mixed.
5-Workshop Photos:
6-Delivery time: 90 working days
7-After-sell service:
Engineer will be dispatched at needed.
The buyer provides engineer's roundtrip flight tickets, board and lodging, the security as well as each person of daily wage.
8-Guarantee: 12 months since shipping date(exclude easily wearing part)
