Various
Industrial
GB
>98%
Alloy
Round
Dies
Extrusion Mould
Tungsten Carbide
CIF, Fob, EXW
Acceptable
M&J
Box Inside and Carton Outside
ISO
Zhu Zhou
8466910000
Product Description
Tungsten Carbide Drawing Dies
1. High strength and high hardness
2. High elastic modulus with good rigidity
3. High compressive strength
4. Good wear resistance
5. Small thermal expansion coefficient
6. Good chemical stability, no obvious oxidation behavior at high temperature.
Packaging & Shipping
Shipment: by Express/ by Air /by Sea
Arrangeable according to your requests
Our Services
Quality Control
* We will inspect and test all products after finishing production and before delivery.
* We can provide dimension & inspection certificate as customers' requirements.
* We also can provide customers' samples dimensional verification.
Products we supply and make are:
1. Tungsten carbide products:
Carbide Rods, Carbide Bars, Carbide Strips, Carbide Plates, STB Carbide Blanks, Drawing Dies, Cold Forginng Dies, Carbide Disc Cutters, Carbide Inserts, Carbide Shims, Carbide Burrs and Carbide Burr Blanks, Carbide Mining Bits, Carbide Drilling Bits, Carbide Cutting Tools for Wood and Bamboos, Tile Cutter Wheels, Scriber Tips, Customized Carbide Products etc.
2. Titanium and titanium alloy products:
Titanium Rods, Titanium Tubes, Titanium Pipe Fittings, Titanium Plates, Titanium Sheets, Titanium Foils, Titanium Wires, Titanium Nuts and Bolts, Titanium Brazing and Casting, Cutomized Titanium Products etc.
1. High strength and high hardness
2. High elastic modulus with good rigidity
3. High compressive strength
4. Good wear resistance
5. Small thermal expansion coefficient
6. Good chemical stability, no obvious oxidation behavior at high temperature.
| hole diameter(mm) | tolerance(μm) | Die sleeve | |
| A | B | ||
| φ0.020~0.070 | 0.5 | 25 | 5 |
| φ0.071~0.200 | 1 | 25 | 8 |
| φ0.201~0.400 | 1 | 25 | 8 |
| Φ0.401~0.600 | 1 | 25 | 10 |
| Φ0.601~1.000 | 2 | 25 | 10 |
| more than 1.000 | 3 | 30 | 15 |
| Name Wire materials | Flexile wire | Hard wire | |
| Inlet area | 70°+/-20° | 60°+/-20° | |
| Lubrication area | 35°+/-20° | 30°+/-5° | |
| Compression area | 16°+/-2° | 14°+/-2° | |
| Sizing area | 20-50 | 40-80 | |
| Safety angle | 15°+/-5° | 15°+/-5° | |
| Outlet area | 50°+/-20° | 50+/-20° | |
Packaging & Shipping
Shipment: by Express/ by Air /by SeaArrangeable according to your requests
Our Services
Quality Control
* We will inspect and test all products after finishing production and before delivery.
* We can provide dimension & inspection certificate as customers' requirements.
* We also can provide customers' samples dimensional verification.
Products we supply and make are:
1. Tungsten carbide products:
Carbide Rods, Carbide Bars, Carbide Strips, Carbide Plates, STB Carbide Blanks, Drawing Dies, Cold Forginng Dies, Carbide Disc Cutters, Carbide Inserts, Carbide Shims, Carbide Burrs and Carbide Burr Blanks, Carbide Mining Bits, Carbide Drilling Bits, Carbide Cutting Tools for Wood and Bamboos, Tile Cutter Wheels, Scriber Tips, Customized Carbide Products etc.
2. Titanium and titanium alloy products:
Titanium Rods, Titanium Tubes, Titanium Pipe Fittings, Titanium Plates, Titanium Sheets, Titanium Foils, Titanium Wires, Titanium Nuts and Bolts, Titanium Brazing and Casting, Cutomized Titanium Products etc.
