The oil production truck is a special oil production vehicle modified on the chassis of a car. It is mainly used for oil well production, forced drainage, oil testing, well crossing, salvage, and other operations.
It integrates multiple functions such as oil production, forced drainage, oil testing, oil and waterlogging, salvage, etc. It adopts the suction principle to carry out oil production, forced drainage, and oil testing operations through the oil well casing or oil production pipe. During the operation, you only need to align the wire rope with the wellhead, lower the pipe to a certain depth of the liquid surface, and then lift it up, and the oil in the well can be pumped out and automatically pressed into the tank truck or oil storage tank. It is an ideal equipment for oil field production, with the advantages of strong oil production mobility, low production cost, and convenient operation and maintenance.
| Oil Production Truck | |||
| Manufacturing Company Name | Hubei Tri-Ring Automobile Co., Ltd. | ||
| Vehicle Model | YZZ5170TCYST6 Oil Production Truck | ||
| Basic Vehicle Parameters | Drive Type | 4×2 | |
| Total Mass (kg) | 16500 | ||
| Curb Mass (kg) | 16305 | ||
| Vehicle Appearance Parameters | Length (mm) | 11600 | |
| Width (mm) | 2550 | ||
| Height (mm) | 3900 | ||
| Wheelbase (mm) | 5000 | ||
| Performance Parameters | Maximum Speed (km/h) | 89 | |
| Maximum Climbing Grade (°) | 30% | ||
| Chassis Configuration Parameters | Engine | Engine Emission Standard | Euro II, III, IV, V, VI |
| Manufacturer | Guangxi Yuchai Machinery Co., Ltd./Weichai Power Co., Ltd. | ||
| Displacement (L) | 4.6-6.2L | ||
| Rated Power (Kw) | 147-180 | ||
| Chassis Configuration Parameters | Cab | Type | Half-High Roof Comfort Version Cab |
| Model | T280 (2.25 Wide) | ||
| Standard Configuration | Bluetooth Radio, Laminated Glass, Electric Doors And Windows, Central Locking, Wide Bumper, Roof Box, Multiple Functional Steering Wheel, External Sunshade | ||
| Transmission | Gearbox Type | Manual, 8 Gears | |
| Front Axle | Type | Drum Brake | |
| Loadable Mass (kg) | 5000 | ||
| Rear Axle | Type | Drum Brake | |
| Loadable Mass (kg) | 10000 | ||
| Speed Ratio | 4.444 | ||
| Chassis Configuration Parameters | Frame | Cross-Sectional Dimensions (mm) | 300×80×(8+5) |
| Leaf Spring | Number Of Plates | 9 Front Springs, 10+8 Rear Springs | |
| Tire | Type | Wire Tire | |
| Quantity | 6+1 | ||
| Model | 10.00R20-18 | ||
| Steering System | Type | Adopt A Hydraulic Power Steering System | |
| Braking System | Brake Type | Drum Brake, With ABS Anti-Lock Braking System | |
| Service Brake System Type | Dual Circuit Air Brake | ||
| Parking Brake System Type | Spring Break | ||
| Parking Control Type | Hand Brake Operation | ||
| Electrical System | System Voltage | 24V | |
| Battery | 100AH Dual Battery | ||
| Top Configuration Parameters | Drilling Rig | Maximum Operating Depth (M) | 900 |
| Maximum Working Load Of Derrick (Kn) | 50 | ||
| Rope Capacity Of Drum (M) | 1000 | ||
| Wire Rope Diameter (mm) | 14 | ||
| Derrick'S Working Height (M) | 11 | ||
| Other Configuration | Triangular Warning Sign, Tool Kit, Spare Tire At The Rear Of The Frame, ABS, And Air Conditioning. | ||
Oil production vehicles can be easily moved between different oil wells. Compared with fixed oil production equipment, it is not strictly restricted by geographical location and can quickly respond to the production needs of different oil wells. For example, in some areas where small oil wells are scattered, oil production vehicles can produce oil wells one by one, effectively utilizing resources.
For some small oil wells or oil wells with a short production cycle, oil extraction trucks are an economical choice. The purchase and installation of fixed oil extraction equipment often require a large amount of capital investment, including the construction of oil extraction platforms, laying of pipelines, and other infrastructure. However, oil extraction trucks only need to purchase the vehicle itself and some supporting equipment, and do not require large-scale infrastructure construction, which reduces the initial investment cost.
For some small oil wells or oil wells with a short production cycle, oil extraction trucks are an economical choice. The purchase and installation of fixed oil extraction equipment often require a large amount of capital investment, including the construction of oil extraction platforms, laying of pipelines, and other infrastructure. However, oil extraction trucks only need to purchase the vehicle itself and some supporting equipment, and do not require large-scale infrastructure construction, which reduces the initial investment cost.
Oil production vehicles usually have not only oil pumping functions but may also be equipped with oil storage, oil-water separation, and other functions. Some advanced oil production vehicles can also perform simple crude oil quality testing. In this way, during the production process, crude oil can be preliminarily processed, reducing the pressure of subsequent processing links and improving the overall efficiency of crude oil production.
Working Principle Of Oil Production TruckIt is powered by the power equipment on the vehicle (usually the engine). First of all, the oil extraction system of the oil extraction truck plays a key role. This system includes a sucker rod and a pump. The up-and-down movement of the sucker rod drives the pump. When the piston of the pump moves upward, the pressure in the pump barrel decreases, allowing the downhole crude oil to enter the pump barrel under the action of the pressure difference; when the piston moves downward, the crude oil in the pump barrel will be lifted upward through the oil pipe.
In addition, some oil extraction trucks are also equipped with an oil storage system. After the oil is lifted, it can be temporarily stored in the oil storage tank on the vehicle, which is convenient for subsequent transportation and processing. At the same time, in order to ensure the safety and stability of the oil extraction process, there are various monitoring and control equipment on the vehicle, such as pressure sensors that can monitor the pressure changes in the oil pipe, adjust the speed of oil extraction and other parameters according to the pressure conditions, and ensure that the crude oil can be continuously and efficiently extracted.
Researched by board of directors of Tri-Ring Group Company and approved by Hubei SASAC, Hubei Tri-Ring Motor Industrial Park was initiated on April, 28th 2010 and was put into operation in 2014 according to the revitalization plan of auto industry in Hubei Province and the twelfth five-year plan of Tri-Ring Group Company. The park is in an irregular rectangular shape, with a length of 1148m and width of 643-814m. It has a floor area of 718013m2 and building area of 470700m2.
Hubei Tri-Ring Motor Co., Ltd. has gained over 40 years experiences in the R&D of special purpose vehicles. It created a well-structured, highly competent and highly efficient R&D team which can meet with the trend of auto industry as well as the development demand of the company. Tri-Ring R&D center has been accredited as provincial enterprise technical center, High-tech enterprise, Engineering Research Center and Innovative enterprise etc. ever since 2010. It carries out long-term cooperation with renowned institutes and engineering companies like Wuhan University of Technology, Huazhong University of Science and Technology, TJ Innova Engineering & Technology Co., Ltd. etc.
The company has a national standard vehicle testing center, of which there are various testing facilities of 265 sets, fulfilling 35 different performance tests to chassis, complete vehicles and key auto parts in terms of power performance, fuel consumption performance etc.
The company possesses a flexible assembly line for heavy, medium, light duty traditional diesel chassis and new energy chassis (including subassembly of engine, gearbox and axles), as well as commercial vehicle production line relating to stamping, metal processing, welding, refitting and painting, which is capable of producing various commercial vehicles of 50,000 units annually.
The company has its own cabin factory. It has over 400 sets of equipment for stamping, welding, painting, assembly, metal cutting, heat treatment and power supply, of which there are over 60 sets of press machines of 10T-1300T and over 1000 sets of large scale and medium scale jigs and molds. The cabin factory is capable of developing and manufacturing cabins for heavy, medium, light and agricultural vehicles, with an annual productivity of cabins for 30,000 units heavy and medium vehicles, stamping parts for 800,000 units, and window glass regulators for 1,000,000 units.
Huanmin auto parts company is a wholly-owned subsidiary of Hubei Tri-Ring Motor Co., Ltd. Huanmin is mainly engaged in the manufacturing of parts for auto chassis, of which frame is its key product. Its current annual productivity of frame is 20,000 units.
The company has a comprehensive and mature sales network of over 200 distributors and service network of over 500 service stations all over China. Besides, its products are widely exported to overseas market including South America, Southeast Asia, Africa, Middle East etc. Worth to mention, its electric vehicles were exported to South America in large quantities.
Q1. Is your company a factory or a trading company?
A: We are a leading manufacturer of special trucks, tank trucks, trailers, and spare parts in China. Welcome to visit our special vehicle production base in Suizhou City, China.
Q2. What are your payment terms?
A: T/T 30-50% as deposit, the rest to be paid before delivery. We will show you photos of the products and packages before you pay the balance.
Q3. What are your delivery terms?
A: EXW, FOB, CFR, CIF, DAF, DDU.
Q4. How about your delivery time?
A: Generally, it takes 20 to 30 days after receiving the advance payment. The specific delivery time depends on the items and quantity of the order.
Q5. Can you customize the products to meet my requirements?
A: Yes. We have a professional R&D team, and we can produce products exactly as you require.
Q6. What is the price of your products?
A: We are factory direct sales, so the price is very competitive. Different products have different prices. The price
also depends on your special needs. To know the exact price, please contact us!
Q7. Do you test all the goods before delivery?
A: Yes, we do 100% testing before delivery.
Q8. What service can I get from you?
A: We provide lifetime tracking service and a one-year free warranty for all our products. At the same time, we provide free training and technical support to guide you to repair the product. We will also provide original spare parts if necessary, and you only need to pay the shipping cost.
