PVC
Indoor
Customized
PVC UV Marble Sheet
PVC Marble Sheet / Board
Moisture-Proof, Waterproof, Fireproof, Heat Insula
Hotel
Modern
Graphic Design
Stripes & Plaid
Waterproof, Compressive, Recyclable
1220*2440/2800/2900*3 mm or Customized
2 mm-3.5 mm
Glossy
Customized
500 PCS
Indoor Decoration Board
CE;Carb;Coc;ISO 9001 etc
Hanju
Carton
1220 mm width
China
3925900000
Product Description


UV board main raw materials are calcium powder and PVC. The content of calcium powder is relatively much higher. The finished product generally looks a bit like stone on the surface, but is actually a synthetic product. It is a board whose surface is protected by UV treatment. The board is formed by applying UV paint on the planed, density board, and then drying through the UV curing machine. Because of its easy processing, it can realize industrialized production, bright color, abrasion resistance, strong chemical resistance, long life, high requirements on mechanical equipment and process technology, and has the characteristic of moisture resistance. The primer adopts solvent-free 4E Green high-grade paint, non-volatile, non-toxic and environmentally friendly, with high gloss after curing, is a decorative board with ideal antibacterial effect.
PVC marble board is a kind of imitation marble decoration material, with many advantages,Waterproof and fireproof, and easy to clean Material made of polyvinyl chloride and stone powder, resistant to high temperature Heating extrusion production, so environmental protection, pollution-free PVC marble board Can be used in many places, bathroom, bedroom, kitchen, background wall and so on.


Thoughness
The thoughness is good enough to be bendable
Instead of natural marble, but weight is only one fifth of
the natural marble, and price is just one tenth of the
natural marble.
The thoughness is good enough to be bendable
Instead of natural marble, but weight is only one fifth of
the natural marble, and price is just one tenth of the
natural marble.
Moisture - proof
Moisture-proof and anticorrosion to prevent pest erosion
Easy to clean, cut and install (use glue is ok, no more nails
glue); Glossy; Formaldehyde-free; No radiation;
Moisture-proof and anticorrosion to prevent pest erosion
Easy to clean, cut and install (use glue is ok, no more nails
glue); Glossy; Formaldehyde-free; No radiation;


Formaldehyde free
It has the mould proof properties without the
formaldehyde posion and radiation
100% water-resistant, fungus-resistant, corrosion-resistant,
termite-resistant, etc.
It has the mould proof properties without the
formaldehyde posion and radiation
100% water-resistant, fungus-resistant, corrosion-resistant,
termite-resistant, etc.



Material | PVC + calcium powder + additive | Density | 2.0g/cm*3 | |
Size | 1220*2440mm/1220*2800mm etc | Thickness | 2.4-6mm | |
Technology | Hot stamping foil & UV-coating | Certificate | CE & SGS & ISO & CARB | |
Installation | With glue on wall | Glue | Silicon Glue | |
Color | Marble, wood, solid color&More than 400 design in total | |||
Composition | 45% PVC, 52% CaCo3, 3% additive | |||
Structure | PVC board + Hot stamp foil + UV-coating + PE protection film |

1. The bottom layer of the confimation and clean the bottom to be fully dry,so that the bottom level.Remove dirt and rubbish.The bottom layer,please use the gypsum board or the magnesium plate and the surface smooth and waterproof material plate. |
2. Marking and Positioning In accordance with the size of the decoration,the shape of the bottom line,positioning. |
3. Double side tape adhesive bonding tape at the tixed position,hard pressed to make its cement. Usage:the wall is about 3.3/m2 of the ceiling is about 4.3/m2. |
4. Adhesive glue Cut the hose glue bottle mouth,leaving the cigarette weight(about 7mm) the width of the exit,and then squeeze the glue,(tape beside the position in the adhesive glue into a wire bound usage on the wall about 0.5 A/m2 the ceiling about 0.6A/m2. |
5. Double sided adhesive tape for the removal of the adhesive tape Stripping,remove the Separation of paper |
6. In 10 minutes after the bonding of the decorative plate,the decoration plate is bonded to the fixed position.The position of the hands to press the tape,to make it fully bonded.Please note that you can not move or re-bond. |
7. Maintenace of 1 days during the course of the adhesive glue. |










As the professional pvc products provider, strict quality control system, quick response & solution is our basic service, so we ensure your needs in products will be satisfied in our best trying. To be your cooperator, your opinion & idea, your suggestions,and your requirements will be respected. Now all our products are 100% for exporting, more and more customers from Middle East, Eastern Europe, Africa, and South America are cooperating with us.


We arelooking forward to establishing good and long term cooperation relations with all customers from all over the world. Welcome to visit our factory and have good business negotiations!



A1: we provide small piece free samples,but freight charge taken by customer.
Q2: What's your MOQ?
A2: only one piece .
Q3: How many days can you send samples to us?
A3: Within 5 days after your confirmation.
Q4: Can customer choose colors?
A4: Yes ,we will offer you film book to choose color.
Q5: What kinds of payment methods do you accept?
A5: Usually we accept 30% as deposit and the balance is before shipment.
Q6: What is your delivery time?
A6: Normally our delivery time is within 15-20 days after receiving your deposit .
Exact production time depends on real quantity of the order.
Q7: Do you offer installation instruction?
A7: Yes, we have both drawing instruction and video.
Q8: Can we be your distributor?
A8: We accept only one distributor in one area, pls contact Insoul team to confirm.
Q9: Can your wall panel be used in wet and hot or cold situation?
A9: Yes, our panel can be used in bathroom, and have good performance during -20 to 80ºC