Textile Silk Pattern Printing Silicon Ink Liquid Silicone For Industry characteristics and uses
product description
THS-1300F ribbon drops glue
This product is a two-component plus molding liquid silicone rubber, with excellent weather resistance and anti-slip function, and good adhesion with cloth. This product is non-toxic and environmental protection, high strength, low hardness, transparency is prominent, feel soft and exquisite, three-dimensional effect is outstanding, can be fast curing at low temperature, mainly used in textile clothing, webbing anti-slip, silk screen printing and elastic belt elasticity and tensile reinforcement.
Indicators
| Before curing | iteme | index |
| Appearance (A/B) | Transparent and vixcous | |
| Viscosity/pa.s | 80000 | |
| Operation time(h) | ≥30 | |
| After curing | Durometer (Shore A) | 40 |
| Elongation (%) | ≥650 | |
| Tensile strength(MPa) | ≥ 4 | |
| Tear strength (kN/m) | ≥10 | |
| Density(g/cm3) | 1.08-1.12 |
* This data is not used for specification development
performance
· Two components, 2:100
.Excellent weather resistance
.Good skid resistance
.Non-toxic and environmentally friendly
· Good adhesion with cloth
.high strength
. lower hardness
.
Application field
· Can be used for textile clothing, woven belt skid
I can be used for screen printing and elastic belt elastic and tensile reinforcement
Packaging and Storage
Packing: Component A: 2kg/ pot
Component B: 20kg/ barrel, 200kg/ barrel, lined with plastic bags
Storage: Store tightly sealed in a cool place
Shelf life: 12 months, under the action of shear force (strong stirring) can restore its fluidity, beyond the time of reinspection can still be used
Dongguan Tianhui New Material Co. LTD
Address: No. 251 Fenxi Road, Wanjiang Street, Dongguan City
Use method:
Operation suggestions:
1.Printing high density silicone ink:Add 10%-20% silicone thinner and 3% silicone fixer to the high density silicone ink then stir well and printing 5-6 times for base. Dry the surface at 80-90ºC.
2.Toning the high density silicone ink: Add 5%-8% silicone color paste (silicone white paste 10-15%), 10%-20% silicone thinner and 3% silicone fixer then stir well and printing 2-3 times.
3.Printing the surface:Printing the shiny silicone ink if need glossy effect(printing the matt silicone ink if need matt effect).Add 10% silicone thinner and 3% silicone fixer then stir well and printing 1-2 times.Dry surface at 80-90ºC.
4.After finishing all the printing,100-120ºC baking 3-5 minutes.
Attentions:
1.Keep the surface flat before baking.
2.Baking time is based on the size of pattern,in general need to bake 3 minutes about small LOGO,if the pattern is big,baking it for more time according to the condition.
3.To add the fixer by weighing it.
4.If use the musket for baking, the musket should keep a certain distance with the table, in case of the temperature is too high.
Tips:
Our company's product information only serve as a test reference data, users need to do sample testing according to your actual production, batch production after confirm qualified.
transportation
EFFECTIVE PHOTO
Why Choose Us?
2.Sample Test
3.Technical Support
4.Engineers Site Instruction
5.New products developing
6.New Market developing
7.Factory Visiting Reception
8.China visiting reception
9.China Latest silicone news
10.Related Products Purchasing Assistance
11.More than 10 years experience in producing liquid silicone rubber
Certificate
Packaging, storage and transportation and precautions
• The base rubber in this series is packed in 20kg / per iron can.
• This series of products should be stored in a dry, ventilated and cool place to prevent rain and sunlight.
• Avoid contact with condensation type silicone rubber curing agents during operation. Also likely to cause the compound to not solidify are amines, sulfur and phosphorus compounds, and some metal salts. Avoid moisture ingress during use.
• The storage period of this series of products is one year, and the fluidity can be restored under the action of shearing force (strong stirring). It is recommended that the rubber material be stirred in a container first, and then added with a curing agent and stirred evenly. It can still be used after passing the retest.
Lead Time :
| Quantity(Kilograms) | 1 - 200 | >200 |
| Est. Time(days) | 3 | To be negotiated |
About us
When I choose a product,I want to know the manufacturer of the product to verify that my product is of high quality.So I also prepared our information for you, so you can choose us with confidence.
Main product
In addition to the main products, our materials can also be used as raw materials for many products, such as cables, cosmetic molds, mechanical supplies, waterproof supplies.
If you have other needs, you can contact me first to inquire whether our silicone can meet your needs. demand
CONTACT US
