WS1
Abrasion Resistance
Automatic
New
SGS
12 Months
Semiautomatic
Vertical
Electric
1000
2960mm
0.5mm
Electroplated
180#
RECO
Carton
SGS
China
8202100000
Product Description
| Perimeter(mm) | Diameter of body shank(mm) | Diameter of wire(mm) | diamond grit | Type of Production |
| L2960 | 0.3 | 0.6 | 180# | Electroplated |
| L2960 | 0.2 | 0.5 | 180# | Electroplated |
| L4100 | 0.3 | 0.6 | 180# | Electroplated |
| L4100 | 0.2 | 0.5 | 180# | Electroplated |
The busbar of annular diamond wire mainly adopts the process of weaving metal wire into rope. A single busbar is welded by more than 5 steel wires, and then the diamond powder is consolidated on the metal wire matrix by electroplating process. Especially, it is used for cutting silicon crystal, crystal, ceramics, gems, stone and other hard and brittle materials. Compared with the traditional single-line reciprocating cutting technology, it has the effect of reducing cost and improving cutting efficiency.
This kind of annular diamond wire is special for silicon and sapphire ingot cutting. It also can be used for cutting glass and ceramics with good sharpness and good cutting effect.The diamond grit of the annular diamond wire which we choose are of top quality. What's more, it has top shock-resistance performance and top cutting performance.
Good sharpness and small chipping of the cutting edge are our biggest advantages!
Customization is available on your request.
Have a try and you will love it!
