Steel wheel rim roll former
Description of Wheel rim roll former
This machine is specially designed for forming flared rims into final shape. Usually there need 3 or 4 same machines with different forming rollers for this processing. If you only want to have one machine to save cost, you should change forming rollers from time to time.
The main shafts are driven by hydraulic; the side guiding shafts are driven by pneumatic.
This machine is equipped with automatic loading system, only one operator is needed for three machines.
The main shafts are made by 40Cr, hardened & tempered, long life. The main shafts can be 3D adjusted (up & down, forward & backward, incline).
Main configurations of Wheel rim roll former
1. PLC is Omron from Japan
2. Touch screen is Delta from Taiwan
4. Sensors are imported from Japan
5. Lubricating pump is BIJUR from USA
Main technical data of Wheel rim roll former
2. Suitable rim width: 4~8"
3. Main shafts diameter: 135mm
4. Main shafts length: 350mm
5. Main forming roller quantity: 2
6. Guiding roller quantity: 2
7. Side guiding shaft diameter: φ90 mm
8. Side guiding stroke: 200mm
9. Main shaft speed: 50~450 rpm
10. Max. distance between centers of the upper and lower main shafts: 362mm
11. Min. distance between centers of the upper and lower main shafts: 262mm
12. Main shafts adjustable tilt angle: 0 ~ 1.5 º
13. Lower main shaft axial adjustable distance: ± 2 mm
14. Lower main shaft raising force: 10000kgf
15. Main shafts torque: 3850N·m
16. Hydraulic pump motor power: 68kW
17. Lubricating method: motorized centralized lubricating
18. Machine dimension: 2000 x 1600 x 1800mm
We, Nantong Zhenhuan Trade Co., Ltd., are specialized in different kind of machines for more than 20 years. We can provide you not only good quality wheel rim related machines but also good after-sale services.
