FZSW-330/12.5
High-voltage, High-temperature
Composite Polymer
Post Insulator
B Type Insulator
High Voltage Power Transmission, Insulation, Electrical Installation
Bolt Circle
12.5kn
ISO9001, ISO14001, ISO45001
Grey, Red, Customized
Line Power
82.4kg
330kv
Customized
Plywood Case
3150± 10mm
China
8546900000
Product Description
Composite Station Post Insulators
In the early years, station post insulators were mostly used for telegraph poles. With the development of science and technology, a lot of disc-shaped insulators were hung at one end of the high-type high-voltage line connection tower, which was to increase the creepage distance.Insulators play two basic roles in overhead transmission lines, that is supporting conductors and preventing current from returning to the ground. These two roles must be guaranteed. Insulators should not fail due to various electromechanical stresses caused by changes in the environment and electrical load conditions, which will damage the operating life of the whole line.
Details:
TECHNICAL DATA:
| Highest System Voltage (kV) | Height (mm) | Dry Arcing Distance (mm) | Creepage Distance (mm) | Specified Cantilever Load (SCL) | Max. Design Cantilever Load (MDCL) | Wet switching impulse Withstand Voltage (kV) | Lightning Impulse Withstand Voltage (kV) |
| 330 | 3150±10 | 2930 | 9380 | 12.5kN | 6.25kN | 950 | 1425 |
Technology characteristics:
- Silicone Rubber Housing
Better hydrophobicity migration performance
Better pollution resistance
Excellent electrical insulation properties
Excellent aging resistance
| Item | Requirement | Measured Valued |
| Visual examination | Fuchsine, grey or white, no obvious mechanical admixture. Vulcanized silicon rubber with dense and smooth cutting surface. | Ok |
| Hardness (shore A) | ≮50 | 65~70 |
| Tensile strength (Map) | ≮4 | 4~6 |
| Failure elongation (%) | ≮150 | ≮180 |
| Tearing strength (kN/m) | ≮10 (right angle sample) | 12~15 |
| Volume resistivity (Ω.m) | 1X1012 | 3~8X1012 |
| Puncture strength (kV/mm) | Alternating current ≮22 | ≮30 |
| Tracking and erosion | TMA4.5,erosion depth≯2.5mm | TMA4.5, erosion depth <0.8mm |
| Flammability (Grade) | FV-0 | FV-0 |
- Corrosive Resistance Fiberglass Core
Excellent resistance to high temperature, stress corrosive & acid attack
Better damping Performance
High tensile strength (>1200Mpa)
Excellent creep resistance
Excellent anti-fatigue fracture properties
- Crimping & Multiple Sealing
High mechanical strength
Small dispersion
Reliable sealing performance between rods and end fittings
STANDARDS:
IEC 62231, ISO 9001, ISO 45001, ISO 14001, etc. We can design products in accordance with Client's Requirements.
PACKAGING
All insulators are packed in weatherproof containers in order to protect the products during land, air and sea transportation. Several different grades of packaging can be offered depending on the mode of transport and the expected storage conditions. Special packaging arrangements can be accommodated upon the users' request.
About US
Wuhan Line Power transmission and transformation co., LTD. Mainly produces and sells composite insulators and accessories. Is a collection of manufacturing, processing, distribution and other business as one of the manufacturing company. The company is based on the r&d, manufacturing and sales of the complete set of composite insulator equipment.With excellent product quality, reasonable price and good service for the enterprise, won the majority of customers praise and trust.
Factory Direct
Quality Control:
