| Grade | 201 UNS 20100 SUS201 AISI 201/S20100 |
| Stainless Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Standard | ASTM A240 / ASME SA240 ASTM/ASME 240/480,JIS 4305,DIN EN 10088-2JIS, AISI, ASTM, GB, DIN, EN, etc |
| Stainless Steel Plate and sheet Length | 1000mm-2000mm-2438mm-3048mm-6000mm-8000mm-13000mm or as required |
| Stainless steel Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| Stainless steel Plate Thickness | 0.3 to 120mm or as required |
| ASTM A240 Stainless Steel 201 Plate Process | Hot/ Cold Rolled/forging |
| Stainless steel Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM A240Stainless steel sheet, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Stainless steel Sheet ASTM | ASTM A240 |
| Stainless steelSheet AMS | AMS 240 |
| Tolerances of width and thickness | ASTM-ASME-GB-EN-DIN-JIS |
| Stainless steel Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Stainless steel Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm,1500*6000,Cold rolled 304 Stainless Plate 0.5-6.4 mm,Hot rolled 304 Stainless Plate 3.0-60.0 mm |
| Stainless steel Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM A240Stainless Steel Sheet suppliers |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including:Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting |
| Plasma profiles | As per customer's drawings |
| Value added services for 201 Stainless Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| Manufacturer | POSCO, Aperam, ATI, Baosteel, TISCO, ArcelorMittal, VDM, Nippon Metal, Tsingshan, Delong. |
| China Stainless steel sheet Manufacturer | ASTM A240Stainless Steel Stainless steel sheet: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Stainless Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Steel Stainless Stainless steel sheet: Steel Stainless Clad plate is a composite steel plate made by bonding Stainless Plate, etc.ASTM A240Stainless SteelStrip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| Stainless steel sheet Origin | CHINA |
| Packing of Stainless steel sheet | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy Stainless steel sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment,NABL Approved Lab Reports,Any third party inspection is accepted,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count TestGrade: AISI 304/S30400 |
| Manufacturing: cold-rolled plate, hot-rolled plate, forged plate | |
| Standard: ASTM, ASME, GB, DIN, JIS, ISO, EN, BS | |
| Type: cold-rolled thin plate, hot-rolled thick plate | |
| Surface: 2B, NO.1, NO.4, HL, BA, 8K, etc. | |
| Length: 2438mm3048mm6000mm can be customized | |
| Origin: TISCO, Baosteel, Posco, Tsingshan, Delong |
Daixun Alloy's stainless steel plate products have excellent flatness and thickness accuracy. Based on a constant quality control system, we manufacture extremely uniform stainless steel plates with excellent formability and corrosion resistance.
We always use the latest automatic control technology for stainless steel plate production, and strive to improve the precision in all aspects, so that the stainless steel plate can be rolled under ideal conditions, so that the surface of our entire stainless steel plate is finely processed, and the excellent glossiness of the product surface has been unanimously praised by customers.
Strict Quality Control
Daxun cuts and finishes high quality stainless steel sheets to meet your exact size requirements. Stainless steel sheets are fully certified. As a proud member of BSSA and ISO 9001 certified, all our stainless steel sheets are sourced from reliable factories and must pass our strict quality control procedures before delivery to our warehouse. We will conduct strict quality control on each product from start to finish to ensure that you will receive the goods to your utmost satisfaction.
Stainless steel plate surface description
| Finish Designation | Method and degree of finish |
| No.1 | After hot rolling, heat treatment, pickling or other equivalent treatment is applied. |
| No.2D | Annealing and pickling are performed after cold rolling; material is soft with surface of silver-white luster; used for general applications and deep drawing. |
| No.2B | After 2D finish, skin pass rolling is performed to obtain a more suitable luster; the surface becomes very exquisite; used for general applications. |
| No.3 | Intermediate 100-120 grit finish; used for applications in which surface polishing is performed after shaping. |
| No.4 | General 150-180 grit finish; used for restaurants and kitchen equipment and tools. |
| #240 | 240 grit finish; used when a finer finish than No. 4 is required; typically for restaurants and kitchen equipment and tools. |
| #320 | 320 grit finish polished product. |
| HL | This finish is performed by continuous linear polishing using an abrasive of appropriate grain size; mainly used for architectural applications. |
| BA | Achieved by performing bright annealing after cold rolling and then skin pass rolling to obtain even greater reflectance; provides excellent corrosion resistance; used for household appliances, kitchen equipment, and automobiles. |
| 8K | Through multiple grinding, it achieves very high brightness and smoothness, like a mirror. |
About Daxun Stainless Steel Plate
Daxun International's stainless steel business began in 2003. After 20 years of rapid development, its stainless steel materials and processing business has long been at the forefront of the industry.
Daxun International has been engaged in overseas business for more than 100 years, and its export revenue exceeded US$100 million in 2023. Daxun has established three export service bases in China and cooperated with engineering companies, steel mills, and international trading companies to serve overseas markets, continuously improving service capabilities, and continuously expanding overseas markets through these cooperations.
Comprehensive Stainless Steel Plate Service
Daxun International provides stainless steel "supermarket"-style services and maintains long-term cooperation with dozens of well-known steel mills around the world. The company has a standing inventory of 160,000 tons, including ordinary stainless steel plates, duplex steel plates, nickel-based alloy plates, heat-resistant steel plates and other metals, totaling 20,000 tons. Daxun's stainless steel materials are of reliable quality, and the variety specifications and delivery weight meet strict standards.
Advanced Processing Capabilities
Daxun has a wealth of steel processing equipment, professional physical and chemical testing centers and various processing lines, including cutting, grinding, forming, beveling, welding, heat treatment, machining, spraying, etc., serving more than 30 industries such as automobiles, home appliances, elevators, new energy, vacuum semiconductors, food and beverage/biofermentation, petrochemicals, and energy equipment.
Diverse and Reliable Services
Daxun's rich experience is reflected in a wide range of services. The company serves more than 70,000 customers, covering 30 industries, and has more than 30,000 active customers, which reflects both Daxun's rich service experience and the wide recognition of customers in various industries.
Efficient and High-Quality
Daxun provides timely and fast delivery of stainless steel products, with an efficient system integrating information flow, logistics, and capital flow, and real-time order data seamlessly connects to the logistics system to ensure fast and efficient delivery. Daxun's processing centers are located near highways, rivers, and oceans, which facilitates efficient scheduling, response, and transportation.
Quality Commitment
Daxun adheres to quality and integrity, introduces the concept of "Performance Excellence Management", implements the "PDCA+Lean" management concept, and ensures that "Daxun = assured quality" becomes Daxun's business card. The company uses the ERP system to achieve full traceability of each steel plate and promote the industry's anti-counterfeiting work.
Save Costs for Customers
Daxun saves time, materials and stress for customers, and ultimately achieves cost savings. The company provides cost-optimized material recommendations and coherent processing and nesting services to improve material utilization and reduce utilization. Through lean improvement activities, Daxun continuously reduces its own costs and passes on the cost savings to customers. Daxun's comprehensive product traceability system and rapid handling of quality objections allow customers to rest assured.
| Standard | Werkstoff Nr. | UNS | JIS | BS | GOST | AFNOR | EN | CN |
| SS 201 | 1.4372 | S20100 | SUS 201 | 904S13 | STS 317J5 | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 | 1Cr17Mn6Ni5N |
| Grade | C | Mn | Si | P | S | Cr | Ni | N |
| 201 | 0.25% | 5.5%-7.5% | 1.0% | 0.60% | 0.30% | 16%-18% | 2.0%-3.5% | 0.25% |
| Tensile Strength | 99,400 PSI = 520MPa |
| Yield Strength | 42,400 PSI = 275MPa |
| Elongation | 55 - 60% |
| Elastic Modulus | 29,000,000 psi = 203000MPa |
| Hardness Requirement | 183 n/was (MPa) |
| Density | .280 LBS /cubic inch(density 7.93g/cm3) |
| 304/304L/304LN/304H stainless steel Shhet/plate composition | ||||
| Grade | 304 | 304L | 304LN | 304H |
| UNS Designation | S30400 | S30403 | S30453 | S30409 |
| Carbon (C) Max. | 0.08 | 0.030* | 0.03 | 0.04 - 0.10 |
| Manganese (Mn) Max. | 2 | 2 | 2 | 2 |
| Phosphorous (P) Max. | 0.045 | 0.045 | 0.045 | 0.045 |
| Sulphur (S) Max. | 0.03 | 0.03 | 0.03 | 0.03 |
| Silicon (Si) Max. | 1 | 1 | 1 | 1 |
| Chromium (Cr) | 18.0-20.0 | 18.0-20.0 | 18.0-20.0 | 18.0-20.0 |
| Nickel (Ni) | 8.0-11.0 | 8.0-11.0 | 8.0-11.0 | 8.0-11.0 |
| Molybdenum (Mo) | - | - | - | - |
| Nitrogen (N) | - | - | 0.10-0.15 | - |
| Iron (Fe) | Bal. | Bal. | Bal. | Bal. |
| Other Elements | - | - | - | - |
| 316/316L316H stainless steel Shhet/plate composition | ||||||||||
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 316 | Min | - | - | - | 0 | - | 16 | 2 | 10 | - |
| Max | 0.08 | 2 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | 0.1 | |
| 316L | Min | - | - | - | - | - | 16 | 2 | 10 | - |
| Max | 0.03 | 2 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | 0.1 | |
| 316H | Min | 0.04 | 0.04 | 0 | - | - | 16 | 2 | 10 | - |
| max | 0.1 | 0.1 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | - | |
| 321/321H stainless steel Shhet/plate composition | ||
| Grade | 321 | 321H |
| UNS Designation | S32100 | S32109 |
| Carbon (C) Max. | 0.08 | 0.04-0.10 |
| Manganese (Mn) Max. | 2 | 2 |
| Phosphorous (P) Max. | 0.04 | 0.04 |
| Sulphur (S) Max. | 0.03 | 0.03 |
| Silicon (Si) Max. | 0.75 | 0.75 |
| Chromium (Cr) | 17.0-20.0 | 17.0-20.0 |
| Nickel (Ni) | 9.0-12.0 | 9.0-12.0 |
| Molybdenum (Mo) | - | - |
| Nitrogen (N) | 0.1 Max. | 0.1 Max. |
| Iron (Fe) | Bal. | Bal. |
| Other Elements | Ti=5(C) to 0.70% | Ti=4(C) to 0.60% |
| Tensile Strength | Yield Strength | |||||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
| Grade | Tensile Str | Yield Str | Elong | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| Grade | Type | Thickness | Surface |
| Austenitic | 304/304H/304L/304J1 | 0.25-150mm | 2B/BA/NO.4/8K/SB/HL/NO.1 |
| 321 | 0.4-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 | |
| 316/316L/317L/316Ti | 0.3-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 | |
| Ferrite | 430 | 0.4-3.0mm | 2B/BA/NO.4/8K/SB/HL |
| Ultra Pure Ferrite | 443 | 0.4-2.0mm | 2B |
| 436L/439/444/441 | 0.5-3.0mm | 2B,2D | |
| 409L | 0.4-2.5mm | 2B,2D | |
| Grade | Type | Thickness | Original |
| Heat-resistant Steel | 309S | 0.5-40mm | CHN |
| 310S | 0.5-40mm | CHN | |
| Duplex Steel | 2101 | 1.5-50mm | CHN |
| 2304 | 3.0-50mm | CHN | |
| 2205 | 0.5-60mm | CHN | |
| 2507 | 1.0-60mm | SWE / JPN / CHN | |
| Super Austenitic Steel | N08904 | 0.6-50mm | SWE / JPN / CHN |
| S31254 | 0.5-50mm | SWE / JPN / CHN | |
| N08926 | 0.5-50mm | SWE / JPN / CHN | |
| N08367 | 0.5-50mm | SWE / JPN / CHN | |
| Nickel Base Alloy | N08031 | 1.0-50mm | US / JPN / GER |
| N08810/N08800 | 0.8-50mm | US / JPN / CHN | |
| N08028 | 1.0-20mm | US / GER / JPN | |
| N08020 | 1.0-20mm | US / GER / JPN | |
| N08825 | 0.8-40mm | US / GER / SWE / JPN / CHN | |
| N10276 | 0.5-50mm | US / GER / JPN | |
| N06022 | 1.0-50mm | US / GER / JPN | |
| N06625 | 0.8-20mm | US / GER / CHN | |
| N04400 | 1.0-20mm | US / GER / JPN | |
| N06600 | 1.0-50mm | US / GER / JPN / CHN | |
| N02201 | 0.5-20mm | US / JPN | |
| Titanium | TA1/Gr1 | 0.5-50mm | JPN / CHN |
| TA2/Gr2 | 0.5-50mm | JPN / CHN | |
| Welding Material | ERNiCrMo-13 | 1.2,2.4mm | GER |
| ERNiCrMo-3 | 2.4mm | GER | |
| ERNiCrMo-4 | 2.4mm | US |
Q1: What products can you offer?
A: We can offer you general steel types like 310S, 316L,304.304L.201,904L, 316H, 316,316L 300and
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.
Q2. Can you produce the products according to my own drawings?
Yes, we can produce the products according to your drawings that will be most satisfy you.
Q3. How does your factory do regarding quality control?
Quality is a priority. We always attach great importance to quality controlling from the beginning to end.
Q4. Can I request to change the form of packaging and transportation?
Yes, We can change the form of the packaging and transportation according to your request,
but you have to bear their own costs incurred during this period and the spreads.
Q5. How does your factory do regarding quality control?
Quality is a priority. We always attach great importance to quality controlling from the beginning to end.
Q6. How long is the delivery time?
A: 7~20 working days after confirming the payment.
If the order is urgent, we will push our workshop finish in advance.
Q7. What is your Payment?
A: 100% T/T advance, Western Union (For Small Order)
B: 30% T/T and balance 70% before the shipment
C: 100% Irrevocable LC at sight (For Big Order)
Q8: Can you make DDQ ( Deep Drawing Quality)?
A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.
Q9: How to get a sample?
A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
Q10:Which country have you exported to?
A:Until now,we have exported stainless steel material to following countries: Vietnam,Thailand,Turkey,Russia,Maroc,Korea,India,Pakistan,UAE,Ukraine and so on.
Q11: How to visit your company?
A:By flight to Guangzhou Baiyun International airport,then we will pick you up.
Daxun stocks 201 finished stainless steel plates (hot rolled and cold rolled). Because a portion of the nickel used in 300 series stainless steels (such as Type 304) is replaced with manganese, the 201 grade alloy is generally a high performance, lower cost, more stable austenitic stainless steel. In addition, the chemical composition of the 201 alloy provides better annealed mechanical properties than Type 304, which may provide further advantages in terms of weight reduction. Because the tensile strength of Type 201 is approximately 10% higher than that of Type 304, thinner gauges can be used, using less material overall. However, Type 201 stainless steel has lower chromium and nickel contents, so it is not as corrosion resistant as Type 304. 201 grade stainless steel is frequently used in domestic and commercial food service applications, construction applications, appliances, and other uses.
Corrosion Resistance: SS 201 sheet has excellent corrosion resistance suitable for both indoor and outdoor applications. Its excellent corrosion resistance. Stainless steel sheet has excellent resistance to atmospheric conditions, moisture and specific chemicals, thus guaranteeing long-lasting performance and durability. By providing excellent resistance to atmospheric conditions, moisture and specific chemicals, it guarantees long-lasting performance and durability.
