CY-SARV01
Air Release Valve
Stainless Steel
CE, ISO9001
PP-Polypropylene
EPDM-Silicone-NBR
Mechanical Polishing
Diameter Range 3/4"&2"
1.0MPa - 145 Psi
90 Degree Celsius -Valve Ball Is a Plastic Ball
0.906kg/Dm3
eraval
Packing in Cartons or Wooden Cases
3/4" or 1"
Made in China
84818010
Product Description
| Air Release Valve |
Application:
Air Release valve is a reliable, automatic air-relief valve which is installed vertically on the top of a pipeline or container or before the inlet of removal a pump, where the releasing air is required. Here below are two examples of pplications.
Example 1:
Air cavity is formed due to the installation of the pipeline, and thus need to release air.In this case the valve is installed at the top of the pipe.
Example 2:
Discharge air at inside of the pipeline of the pump. When the pump opened the air will be automatically discharged forming a vaccum.In order to avoid the air mixed with products and the apperance of cavitation. In this case the valve is installed in front of the pump, on top of the inlet pipe.
Air Release valve is a reliable, automatic air-relief valve which is installed vertically on the top of a pipeline or container or before the inlet of removal a pump, where the releasing air is required. Here below are two examples of pplications.
Example 1:
Air cavity is formed due to the installation of the pipeline, and thus need to release air.In this case the valve is installed at the top of the pipe.
Example 2:
Discharge air at inside of the pipeline of the pump. When the pump opened the air will be automatically discharged forming a vaccum.In order to avoid the air mixed with products and the apperance of cavitation. In this case the valve is installed in front of the pump, on top of the inlet pipe.
Working principle:
Air Release valve is a double-seat valve with a freely movable plastic ball. The ball, which is lighter than water, According the conditions of pressure to close the upper or lower valve seat.
Air Release valve is a double-seat valve with a freely movable plastic ball. The ball, which is lighter than water, According the conditions of pressure to close the upper or lower valve seat.
| Material | Up and down valve seat . AISI 304/316L |
| Valve ball | PP (Polypropylene) |
| Gasket | EPDM,Silicone,NBR |
| Finishing | Mechanical polishing |
| Technical data | Diameter range (3/4"~2" or DN20~DN50) |
| Product maximum pressure | 1.0Mpa (145 Psi) |
| Highest temperature | 90ºC(194°F )( valve ball is a plastic ball) |
| Density of valve ball | 0.906kg/dm3 |
