1. Test standards
GB/T 2423.18-2008
ASTM.B117-18
IEC60068-2-11
GB/T 10125-2012
QB/T3826-1999
GB 5938-1986
This series of products is a device that simulates the dispersion system composed of tiny droplets containing salt in the atmosphere. It is widely used in the salt spray corrosion test of electronics, electricians, automobiles, motorcycles, hardware tools, plastics and electroplating products. Grade A PP plate is adopted, the thickness is 10mm, and the temperature resistance is up to 90ºC. The heating tube is made of strong acid and alkali resistant titanium tube, and the parts are mostly made of strong acid and alkali resistant materials, which can meet many tests of neutral salt spray, acid salt spray and copper acceleration (CASS)
Tip: Comparison between salt spray corrosion test and natural environment corrosionNSS neutral salt spray test 24h≈ natural environment 1 year;
AASS acetate spray test 24h≈ natural environment 3 years;
CASS copper salt accelerated acetate spray test 24h≈ natural environment for 8 years.
1. Materials:
(a) Both inside and outside the test chamber are made of PP plate with a thickness of 10mm and resistance to acid and alkali and temperature up to 98ºC
(b) The sealing cover of the laboratory adopts PP plate, the thickness is 10mm, the surrounding reinforcement is 12mm, and the acid and alkali resistance and temperature resistance are up to 98ºC. The cover is designed to be the best top Angle of 106 degrees, so that the condensate generated in the test process will not drip onto the sample and affect the test results
(3) The test refill bottle adopts the hidden type, and the salt water supplement adopts the hidden type. After the salt water is prepared, it is filled from the inlet of the test drug, and then flows into the brine bin without opening the cover. At the same time, the side can also observe the water level of the salt water, which is easy to clean and not easy to break.
(4) The laboratory shelf adopts the plane dividing frame, which has strong bearing capacity. The placing Angle is 15 degrees and 30 degrees, and the direction of falling fog and receiving fog is completely the same.
| Main technical parameters of the product | |
| 1. Studio size | 90×60×50cm (length, width and height) |
| 2. Dimensions | 140×81×110cm (length, width and height) |
| 3. Volume (L) | 270L |
| Step 4: Power supply | AC 220V |
| 5. Device power | 2.5 KW |
| 6. Open cover method | manual |
| 7. Laboratory temperature | 35 ° C ±1 ° C / 50 ° C ±1 ° C |
| 8. Pressure barrel temperature | 47ºC±1ºC/ 63ºC±1ºC |
| 9. Temperature uniformity | Plus or minus 2 ºC or less |
| 10. Temperature fluctuation | Plus or minus 0.5 ºC or less |
| 11. Amount of salt spray settlement | 1 ~ 2ml/h.80cm2 |
| 12. Spray pressure | 1.00 + / - 0.01 KGF/cm squared |
| 13. Spray | Continuous spray + intermittent spray |
1.Q :How to provide after-sales service?
A:If customers need our engineers to come to the site for service, we will send out engineers to provide repair service for you.
2.Q: Can we visit and study in your factory?
A: Welcome to visit and study in our factory, we will show you our R&D and production capacity.
3.Q :Can I install and commission the calibration equipment on site?
A: Yes, we can send technicians and engineers to the customer's site for installation, commissioning and calibration.
4.Q: What are the transportation methods?
A :Air freight, sea freight, railroad transportation, all transportation methods according to the customer's needs.
5.Q : What are the packing methods?
A: Standard export wooden box packaging, solid and firm.
6.Q :How do you calibrate the equipment?
A: We have our own calibration and third-party calibration.
7.Q :What are the payment methods?
A :The payment methods are T/T, CIF, Paypal, L/C, VISA and so on.
8.Q :How long is the warranty period?
A :Warranty is 1 year, lifetime free service.
9.Q :What is the delivery time for your company's products?
A :This depends on the actual product you order, usually at least 30 days.
