EDFH
Electronic, PV, Combiner Box, Low Voltage
DIN-Rail
Auto Fuse Holder
10*38/14*85
Medium Fuse Holder
DIN-Rail
Environmental Protection Fuse Holder
European Standard
F
Onccy
1p/2p
Pulling out/Flip off
1-50A
IEC
IP20
10*38mm/14*85mm
Onccy
by Sea/Air
box
China
8536490090
Product Description
DC Fuse Holder For Solar Manufacturer
The features of the PV Modular fuse holders 10×38 is 1000V DC & 1500V DC rated voltages.They have been developed to offer a compact, safety and economic protection solution in photovoltaic installations where due to the increase of the power and technologic evolution, no-load voltages above 1000V DC can be achieved. Modular fuse holders for 10×38 are according IEC/EN 60269 standard. Compact design, with reduced distances.
DC Fuse Holder 1000V10x38mm 1P 2P 32A 10kA
Product Benefits
- Din35 Rail Installation, Easy to Install
- Adjustable terminal block, Wiring firm
- Fire-retardant shell, high temperature resistance
- Flexible installation, Easy to replace
- 1000V 30A
- 1P 10*38mm fuse link
- Finger safe touch
- Din35 Rail Installation, Easy to Install
- Adjustable terminal block, Wiring firm
- Fire-retardant shell, high temperature resistance
- Flexible installation, Easy to replace
Technical Data
| 1P, 1P+N, 2P | 230 VAC |
| 3P, 3P+N | 800 V AC |
| Rated operational current Ie | 32 A |
| Conditional short-circuit current | 10 kAr.m.s |
| Utilization category | AC 20 B |
| Rated impulse withstand voltage Uimp | 4 kV |
| Fuse-links | 10, 16, 20, 25 and 32 A |
| Operating class | gG(gL)/aM |
| Max. Power loss per current path | 3.2 W |
| Mechanical | |
| Frame size | 45 mm |
| Device height | 80 mm |
| Device width | acc. to dimensioned drawing |
| Weight | EAFH |
| 1P | 74G |
| 1P+N | 84G |
| 2P | 156G |
| 3P | 234G |
| 3P+N | 244G |
| Mounting | quick fastening on DIN rail IEC/EN 60715 |
| Degree of protection (built-in) | IP20 (IP40) |
| Upper and lower terminals | lift terminals |
| Terminal capacity | 1.5-10 mm2 |
| Tightening torque of terminal screws | max. 1.2 N.m |
| Dimensions of fuse-link | 10.3 x 38 mm |
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.
Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications.
Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on.
Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc.
Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required.
Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order.
Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement.
Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on.Q:What is the service offered by company?
A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale.
