WMT1010-AL
Yes
1 Year
Metal
Metal-Cutting CNC Machine Tools
Linear Control
CNC
CNC/MNC
0.05~0.06(mm)
Economical CNC Machine Tools
CE
New
420MPa
Metal Cutting Machine
PLC
Bridge Type
1000*1000mm
420MPa Intensifier Pump
Cutting Metal, Marble, Glass
by One 20'fcl Container
WAMIT
Soft Packing
1*1M
China
8456500000
Product Description
CE certification METAL CUTTING MINI SMALL PORTABLE water jet cutting machine
Advantage:
1.37KW SIEMENS MOTOR
2.electric components
3.Seperated body to make more stable cutting effect and better accuracy after cutting a long time.
4.Free abrasive sand feeding system
5.We have the most convenient automatic abrasive sand removing and recycling system
6.imported American intensifier
7. Double anchor, an effective solution for the jitter of gravity when cutting, to ensure the accuracy.
8. Steel beams, after heat treatment, to prevent deformation
9. Bellows can effectively prevent dust, so airtight is better.
10. we assemble a oil tank for cutting table to make the the linear guider no need maintainence
11. Legitimate WINDOWS 7/10 system
12. SIEMENS PLC
13. Operating voltage can be 220/380/415V.
14.Linear guider and ball screw brand are HIWIN.
15. Servo variable pump works more stablely.
16. Two years warranty for the whole machine.
17. we can do GEAR and Rack to make the moving speed increasing to 30m/min which will reduce your half using cost .
Can supply the cutting sand quantity
Need less than 0.2Mpa compressed gas pressure. 220KG Sand can be used for 8-10 hours. CNC control, apply 17 inch LCD
Adopt specialized NCStudio water jet cutting software, have autosave function for next operation.
Apply SIEMENS PLC instead of relay, buttons are Schneider
DELIVERY AND PACKING
Soft packing
After Service
We can provide overseas installation and training service. 24 hours in 7 days a week respond. and respond time is no more than 12 hours.
Provide two years warranty time for the whole machine .And easy-wear parts replace cost is very low.
Advantage:
1.37KW SIEMENS MOTOR
2.electric components
3.Seperated body to make more stable cutting effect and better accuracy after cutting a long time.
4.Free abrasive sand feeding system
5.We have the most convenient automatic abrasive sand removing and recycling system
6.imported American intensifier
7. Double anchor, an effective solution for the jitter of gravity when cutting, to ensure the accuracy.
8. Steel beams, after heat treatment, to prevent deformation
9. Bellows can effectively prevent dust, so airtight is better.
10. we assemble a oil tank for cutting table to make the the linear guider no need maintainence
11. Legitimate WINDOWS 7/10 system
12. SIEMENS PLC
13. Operating voltage can be 220/380/415V.
14.Linear guider and ball screw brand are HIWIN.
15. Servo variable pump works more stablely.
16. Two years warranty for the whole machine.
17. we can do GEAR and Rack to make the moving speed increasing to 30m/min which will reduce your half using cost .
| Main technical parameter of water jet cutting machine | ||
| Intensifier Pump | Item | Parameter |
| Model | WMT3742Z | |
| motor | SIEMENS | |
| Method of Direction Regulation | Electronic direction regulation | |
| Pressure Range | 50-420MPA, continuous pressure is 330-380Mpa | |
| Maximum Flow of Hydraulic Pump | 90 L/min | |
| Maximum Discharge Capacity | 3.7 L/min | |
| Maximum Diameter of Gem Nozzle | 0.33 mm | |
| Power of Master Motor | 37 KW | |
| Power Source | 380V/50HZ, also work at 220V/60HZ, 415V | |
| Cutting Table | Item | Parameter |
| X axis Characteristic | use strong 10mm steel 1000MM cutting range. The cutting table width is 1200mm | |
| Y axis Characteristic | Cast iron is used as the foundation base , 1000MM cutting range . The cutting table length is 1200mm. | |
| Z axis Characteristic | Z axis double linear guide and four sliding block , 170MM, CAN DO 200MM | |
| Control Accuracy | ±0.01mm, cutting accuracy is ±0.1mm, reposition accuracy: ±0.02mm, max travelling speed: 6000mm/min, we have new technology that can make the travelling speed 30m/min. | |
| linear guider | TAIWAN TBI BRAND | |
| Table Ctructure | Separated body, can be delivered by one 20'FCL container | |
| Driving Way | Servo drive system | |
| CNC system | Ncstudio ,Fagor | |
| Servo Motor | SIEMENS motor | |
| Cutting Head | Casting structure and Concrete structure | |
| Sealing Way | soft dustproof cloth on X,Y, Z axis, the sealing result will be better, and there is a oil tank under the cutting table, the linear guider no need maintainence. | |
| Loading Weight Water Tank | Wall thickness is 6mm,using fluorocarbon coating, Can antirust at least 5 years. | |
| CNC Controller | Item | Parameter |
| Control Method | CNC | |
| Display Size | 19inch LCD | |
| Model of Cutting Text | DXF | |
| Model of Computer | Industrial Control Computer | |
| Operating System | Windows 7/10 | |
| PLC | SIEMENS | |
| Cutting Software Advantage | Auto save and transfer common parameter | |
| Controller Displace | Can be fit to suitable place at own will | |
| Automitic Abrasive Feeder | Item | Parameter |
| Founction | Sand storage and sand delivery | |
| Operating | No need electrocnic control,sample operation | |
| Capacity | 200 kg for 8 -10hours | |
| Pressure | 0.3-0.6Mpa compresses gas pressure | |
| Color | White | |
| Deionization System | Item | Parameter |
| Water pressure | 0.15Mpa~0.6Mpa | |
| Water temperature | 5°C~50°C | |
| Environment temperature | 5°C~50°C | |
| Relative humidity | ≤95%(25°C) | |
| Water turbidity | <20FTU | |
| Wireless Handle | Parameter | |
| | Founction | Wireless controlling waterjet |
| Display | Real- time display condition of X,Y,Z axis | |
| Settings | Zero point, on/off valve set, X,Y,Z axis moving | |
| Technology | Advanced technology | |
Machine models: 
| WMT200 1010 | WMT200 1212 | WMT200 1515 | WMT200 2515 | WMT200 2540 | WMT200 2560 | ||
| Platform size | X-axis | 1200mm | 1400mm | 1700mm | 2700mm | 2700mm | 2700mm |
| Y-axis | 1200mm | 1400mm | 1700mm | 1700mm | 4200mm | 6200mm | |
| Cutting stroke | X-axis | 1000mm | 1200mm | 1500mm | 2500mm | 2500mm | 2500mm |
| Y-axis | 1000mm | 1200mm | 1500mm | 1500mm | 4000mm | 2000mm | |
| Z-axis | 150mm | 150mm | 150mm | 150mm | 150mm | 150mm | |
| Cutting accuracy | ±0.1mm | ||||||
| Repeated positioning accuracy | ±0.05mm | ||||||
| Driving mode | Ac servo | ||||||
| Maximum operating speed | 50000mm/min | ||||||
| WMT200 3015 | WMT200 3020 | WMT200 3112 | WMT200 3515 | WMT200 4020 | WMT200 6020 | ||
| Platform size | X-axis | 3200mm | 3200mm | 3300mm | 3700mm | 4200mm | 6200mm |
| Y-axis | 1700mm | 2200mm | 1400mm | 1700mm | 2200mm | 2200mm | |
| Cutting stroke | X-axis | 3000mm | 3000mm | 3100mm | 3500mm | 4000mm | 6000mm |
| Y-axis | 1500mm | 2000mm | 1200mm | 1500mm | 2000mm | 2000mm | |
| Z-axis | 150mm | 150mm | 150mm | 150mm | 150mm | 150mm | |
| Cutting accuracy | ±0.1mm | ||||||
| Repeated positioning accuracy | ±0.05mm | ||||||
| Driving mode | Ac servo | ||||||
| Maximum operating speed | 50000mm/min | ||||||
Advantages:
| The X/Y axis uses a new labyrinth protection. |
| Japan River Valley automatic lubrication system. |
| Internal components adopt the German Schneider brand. |
| Absolute value motor, no zero detector, with power off memory function. |
| International brand AC servo drive power supply and motor. |
60000psi (420mpa) intensifier pump
1.Type of pressurization is hydraulic. (The water is pressurized by using the fluid pressure intensification principle).
2.Max. oil discharge is 90 L/min
3.Max. water discharge is 3.8L/min
4.Max. diameter of orifice is 0.33mm
5.Max. operating pressure is 420MPa(60000 psi)
6.Continuous operating pressure is 350-380MPa
7.Power requirement : 37KW, 3 phrase, 380V/50HZ, can do 220V/415V.
8.Type of shift is electronic
9.Maintenance free accumulator is originally imported from TAIWAN.
10.Intensifier assembly is imported from USA
11.With SIEMENS motor and SIEMENS PLC and the motor is variable pump so that can reduce using cost.
12.all electric components are Schneider brand.
abrasive sand feeding system
Abrasive sand feeding system
No need electronic control, simple operation, reliable, maintenance-freeCan supply the cutting sand quantity
Need less than 0.2Mpa compressed gas pressure. 220KG Sand can be used for 8-10 hours.
CNC controller
Adopt specialized NCStudio water jet cutting software, have autosave function for next operation.
Apply SIEMENS PLC instead of relay, buttons are Schneider
can provide ITALY Imported ECS software which support more than 15 languages
60000 psi direct drive pump
oil chiller
cnc controller
AC 5 axis
water supply system
abrasive sand removal system
Material | Specification | Speed(mm/min) | |
60000psi Servo direct drive pump | 60000psi Hydraulic intensifier pump | ||
Carbon steel plate | 10mm | 330 | 270 |
12mm | 280 | 220 | |
14mm | 240 | 180 | |
16mm | 200 | 140 | |
20mm | 170 | 110 | |
22mm | 140 | 85 | |
Aluminum plate | 12mm | 800 | 600 |
30mm | 200 | 160 | |
Glass | 5mm | 2000 | 1600 |
8mm | 1800 | 1400 | |
10mm | 1500 | 1100 | |
12mm | 1200 | 900 | |
14mm | 1000 | 700 | |
Ceramic tile | 12mm | 2000 | 1500 |
14mm | 1400 | 900 | |
Microcrystal stone | 16mm | 1200 | 900 |
Marble | 25mm | 1000 | 800 |
30mm | 800 | 600 | |
if use our 30kw 63000psi second-generation direct drive pump , the cutting speed will be as follows: the cutting speed will be twice higher than with 420mpa intensifier pump.
MODEL :WMT SDD II 40
MAX PRESSURE :435MPa
Continuous working pressure :370-380MPa
Max orifice diameter :0.43mm
Flow rate :5.6 l/min
Inlet water pressure :0.4MPa
Motor power :30KW
Dimension :1800mm X 900mm X 1200mm
Booster and piping system (high-pressure cylinder, plunger rod, high-pressure seal, low-pressure seal, high-pressure piping, check valve, etc
Dual-row filtration system (5 Micron, 1 micron, in series)
Fully automatic servo control system, output pressure control mode
Intelligent start-stop function
Automatic shutdown for overpressure and automatic protection for underpressure
Power supply:380VAC, 50Hz , 3 Phase
MODEL :WMT SDD II 40
MAX PRESSURE :435MPa
Continuous working pressure :370-380MPa
Max orifice diameter :0.43mm
Flow rate :5.6 l/min
Inlet water pressure :0.4MPa
Motor power :30KW
Dimension :1800mm X 900mm X 1200mm
Booster and piping system (high-pressure cylinder, plunger rod, high-pressure seal, low-pressure seal, high-pressure piping, check valve, etc
Dual-row filtration system (5 Micron, 1 micron, in series)
Fully automatic servo control system, output pressure control mode
Intelligent start-stop function
Automatic shutdown for overpressure and automatic protection for underpressure
Power supply:380VAC, 50Hz , 3 Phase
material | thickness(mm) | Cutting pressure | Max cutting speed (mm/min) |
| Carbon steel | 6 | 370 | 850 |
8 | 370 | 650 | |
10 | 370 | 550 | |
16 | 370 | 300 | |
20 | 370 | 220 | |
30 | 370 | 140 | |
75 | 370 | 40 | |
100 | 370 | 22 | |
125 | 370 | 10 | |
| Titanium alloy | 10 | 370 | 800 |
20 | 370 | 260 | |
45 | 370 | 100 | |
100 | 370 | 26 |
| aluminum | 6 | 370 | 2500 |
8 | 370 | 1800 | |
20 | 370 | 650 | |
30 | 370 | 350 | |
40 | 370 | 260 | |
| Stainless steel | 6 | 370 | 850 |
8 | 370 | 650 | |
13 | 370 | 500 | |
16 | 370 | 300 | |
56 | 370 | 45 | |
| glass | 5 | 370 | 7000 |
8 | 370 | 3000 | |
12 | 370 | 1600 | |
15 | 370 | 900 | |
19 | 370 | 650 |
DELIVERY AND PACKING
Soft packing
After Service
We can provide overseas installation and training service. 24 hours in 7 days a week respond. and respond time is no more than 12 hours.
Provide two years warranty time for the whole machine .And easy-wear parts replace cost is very low.
