The large concrete trowel is mainly used for polishing and smoothing cement and concrete pavements in construction sites and highway construction. It is especially suitable for flattening and hardening of roof cement, which is used to remove air in concrete, level the concrete floor, and enhance the density of concrete.
The machine has the following characteristics:
1. Lightweight material, saving time and effort, and long service life.
2. The bottom of the trowel adopts an arc design, which is more balanced during construction and can prevent mortar from being dug up.
3. The handle of the large trowel can be rotated left and right to adjust the front or back section of the large trowel blade to a certain angle.
4. The handle of the large trowel is cleverly designed and can be quickly disassembled and assembled.
Main Technical Parameters
| Model | Material | Handle Length | Blade Length | Blade Width |
| DMZ-B15 | Stainless Steel | 1.8 m*3 | 120 cm | 15 cm |
| DMZ-B20 | Stainless Steel | 1.8 m*3 | 120 cm | 20 cm |
| DMZ-B30 | Stainless Steel | 1.8 m*3 | 120 cm | 30 cm |
| DMZ-L120 | Aluminum-magnesium Alloy | 1.8 m*3 | 120 cm | 20 cm |
| DMZ-L150 | Aluminum-magnesium Alloy | 1.8 m*3 | 150 cm | 20 cm |
| DMZ-L180 | Aluminum-magnesium Alloy | 1.8 m*3 | 180 cm | 20 cm |
| DMZ-L200C | Aluminum-magnesium Alloy(With Brace) | 1.8 m*3 | 200 cm | 20 cm |
| DMZ-M92 | Manganese Steel | 1.2 m*3 | 92 cm | 12.5 cm |
APPLICATION
It is mainly used for the excavation and renovation of asphalt concrete pavements such as highways and expressways to remove defects such as road congestion and oil waves.
PRODUCT ADVANTAGES
We focus on construction machinery manufacturing for 20 years, making every detail the best and giving you the best experience.
 |  |
| Mixing Drum | Stainless Steel Wiper |
| Quickly disassemble and assemble, one section is 1.8m, three sections are 5.4m, the length can be adjusted according to the construction site to meet different construction requirements. | It can be used for light collection, with a thickness of 1.2 mm, light weight, extended length, wear-resistant anti-corrosion wiper, suitable for construction surfaces of various widths. |
 |  |
| Magnesium alloy Wiper | Manganese Steel Wiper |
| It can be used for slurry extraction, with a thickness of 5 mm and a groove protrusion of 20 mm. The material is lightweight, impact resistant, of good quality and resistant to wear. | It can be used for light collection, with a thickness of 1.2 mm, light material, high cost performance, and a curved design at the bottom, which is more stable during construction. |
