Model NO.:

GY10

Certification:

Material:

Plastic

Power:

Pneumatic

Valve Body Type:

Diaphragm

Diaphragm Material:

Santoprene, FKM, PTFE, EPDM, NBR

Performance:

Corrosion-Resistant, Self-Priming, Low Shear

Temperature Resistant:

100ºC

Self-Priming Head:

2~6m

Maximum Particle Diameter:

1.6mm

Suction and Discharge:

1/4 3/8 in

Compressed Air Inlet:

1/4 in

Max. Capacity:

27L/Min

Max. Head:

70m

Max. Air Supply Pressure:

7bar

Valve Ball Material:

PTFE, PVDF, PP

Max. Viscosity:

10000cp

Trademark:

HCMAG

Transport Package:

According to Requirements

Specification:

179mm*123mm*230mm

Origin:

China

HS Code:

8413709990

Product Description

HCMAG Product Introduction

Pneumatic Diaphragm Pump Product Brief	1. It can pump flowing liquid as well as convey some mediums which are not easy to flow, and has many advantages of self-priming pumps, submersible pumps, shielded pumps, slurry pumps and impurity pumps and other conveying machines.
	2,No need to pour water, suction range up to 7m, head up to 50m, export pressure is not less than 6kgf per square centimetre.
	3, flow wide shield, through the performance is good, allowing through the largest particles. Diameter of up to 10mm pumping mud, impurities, minimal wear and tear on the pump.
	4, head, flow can be achieved through the valve opening stepless adjustment. (Air pressure adjustment in 2-8kg/cm2)
	5,The pump has no rotating parts, which will not cause environmental pollution and endanger personal safety.
	6,No need to use electricity, safe and reliable to use in flammable and explosive places.
	7,Can transport the more viscous liquid. (Viscosity below 10,000 centipoise)
	8, the pump does not need oil lubrication, even if idling, the pump does not have any effect, which is a major feature of the pump.