With this storage option
- Wire mesh welded at every intersection on panels and the doors providing more security
- Easy access and use with reinforced swinging door
- Pre-punched components make these lockers easy to install using ordinary hand tools
- Painted with baked grey powder coat over phosphate-treated steel for lasting durability and protection against corrosion
Panels
Panels shall be 10g wire spot welded into 2'' x 2'' squares (50mm x 50mm x 3.2mm wire) welded into an angle frame of 1 ¼'' x 1 ¼'' x 12 angle ( 32mm x 32mm x 3mm ) welded at every 8'' inches (200mm) . All panels shall be fastened to floor and walls using 1/4'' x 1 1/4'' (6.4mm x 32mm) drive nails. All panels shall be fastened using 1/4'' x 3/4'' (6.4mmx 19mm) zinc bolts and nuts
Swing doors
Swing doors shall be made of the same material and method as panels with an added ½'' rod ( 12.5mm) form center to corners . Doors shall be equipped with padlock lugs, door strikes and 1 1/2 pair of hinges
Ceilings
Shall be 2''x 4''x 1/8'' rectangles (50mm x 100mm) wire framed with 1 1/4''x 1 1/4'' x 12g angle (32mm x 32mm x 3mm ) angle on perimeters and secured with wire loop toes ( option framed tops available)
Finish
Grey powder over a phosphate treated steel
SINGLE TIER LOCKERS
DOUBLE TIER LOCKERS
Wire Mesh Locker used .
| Size |
|
| Material |
|
| Thickness |
|
| Color |
|
| Lock |
|
| Inner accessories |
|
| Ventilate holes |
|
| Application |
|
| Lead time |
|
| Payment term |
|
| Port |
|
|
