ZR
                        Mechanical
                        Single Control Switch
                        Power Built-in Type
                        Control Switch, Playback Switch, Disconnector, Change-over Switch
                        Home, Commercial, Industrial, Vehicles
                        Non Explosion-proof
                        Normally Open
                        Spdt, Snap Action
                        Correlation Type
                        Jpci
                        ISO9001, CE
                        250VAC
                        Water
                        22A
                        1100 Mbar(16psi)
                        PA66
                        JPCI
                        Environmental Protection Carton
                        0.03kg
                        China
                        8536500090
                        
                        Product Description
                    
                                Type ZR Positive pressure switches
Single pole snap action contact pressure switch with check valve.
In line assembly on 10mm soft tubes.
Special for camping water supply pumps
 
Single pole snap action contact pressure switch with check valve.
In line assembly on 10mm soft tubes.
Special for camping water supply pumps
Direct actuating of pumps of the water supply for sinks and showers in recreational vehicles (Caravans, motorhomes). It starts the operation of the pump when the valve is open and when the pressure drops in the circuit.
Fluid: Water
Pressure port connection: Plastic spouts, with barbed end for flexible reinforced tubing with an internal diameter of 10 mm.
Membrane: Silicone, thickness 1mm
Check valve: PA66 with silicone gasket and stainless steel spring
Housing: PA66 compatible with drinking water.
Contact: SPNC opening by pressure rise
Electrical rating:
In alternating current: 16 (4)A 125 / 250VAC; 1/2HP 125VAC; 3/4HP 250VAC (Available up to 22 (8)A 250VAC, 2HP 250VAC)
Direct current: 16 (4)A 12V
Electrical connection: 6.35 × 0.8mm quick connect terminals
Bursting pressure: >1000 kPa (10000 mbar, 145 PSI)
Ambient temperature limits: water: 0 to 85°C (32 to 185°F)
Mounting: 2 legs for mounting on a board surface with 2 screws with 40 mm distance
Operation: The non-return valve maintains the pressure in the water circuit when the submersible pump is stopped.
Caution: This device does not protect the pump against dry running
Maximum calibration value: 110 kPa (1100 mbar, 16 PSI)
Reference
| Set point calibration | 40kPa (400mbar, 5.8PSI) | 80kPa (800mbar, 11.6PSI) | 100kPa (1000mbar, 14.5PSI) | 
| Part number | ZR202XU5YD000000 | ZR202XU5YH000000 | ZR202XU5YJ000000 | 

                    


















