---Vacuum adsorption,with a high-pressure blower. With wind control device machine suction silencer; electrical control box to focus on the same host ,not less than 1.5 m , the operating side of the closed side of the hood.
---Cardon drive,enclosed gear oil immersion type lubrication,can prolong the life of the gearing.
---Corrugated roller diameter Ø260/270mm,adopt 48CrMo high quality alloy steel,after quenching and tempering, hardening, polished surface chrome plated hardness of HRC60 degrees, the cylinder control up and down .
---Pressure roller ,modulation processing with 45# carbon steel , machining and grinding off the surface chrome plated cylinder control up and down .
---the upper and lower Preheat roller, machining and grinding off the surface hard chrome plated, all metal hose connection.
---Pneumatic control glue , glue roller engraved with the pit-style textured back surface polished, hard chrome plated, transfer roller surface machining and grinding off the hard chrome plating.
---Corrugated roller bearings with high temperature and pressure grease lubricated bearings.
---Manual adjust glue amount,easy control and operate the whole machine.
| Max. Designed Speed | 60 m/min |
| Normal Working Speed | 20~40 m/min |
| Working width | 1600mm |
| Corrugated roller diameter | φ260mm |
| Corrugated roller length | 1650mm |
| Heating method | Electrical Heating |
| Motor Control Mode | Frequency Inverter Control |
| Power requirements | 380V/50Hz |
| Total Power | 45KW |
| Material of Corrugated roller | 48CrMo+IF processing |
| Flute type | Customized |
