GJ641X-6L
DN15-DN600;1/2”-24”
Pn10, Pn16, 150lb, 10K
Q/Jbgn02, GB 12239
Jb78, GB4126, ANSI B16.5, DIN3202, JIS
Q/Jbgn02, GB12221-89, Qy 2000-2
Ductile Iron,Casting Steel, Stainless Steel
Natural Rubber, EPDM, NBR, FPM, Iir
BS 6755, GB/T13927
100% Quantity Tested Before Delivery
En1024 3.1 Certificate, Provide Rt, Mt, PT, Ut
API6d/CE/ISO9001/ISO14001
Shf & OEM
Nace Mr-0175
Factory Direct
18 Months
SHF & OEM
Plywood Wooden Case
120x120x100cm
Jiangshu, China
8481804090
Product Description
Construction is as follows:
Product Introduction
Pinch valve (valve) is the introduction of domestic and foreign advanced technology absorption valve of the advantages of the development of a new type of valve, popularity due to its excellent wear resistance, suitable for low pressure pipeline particle slurry or chemical medium conveying control system. Pipe clamp valve open is convenient and flexible, sealed performance is good, put an end to the occurrence of the phenomenon such as PaoMaoDiLou, hose can be replaced periodically, and the body can use for a long time, save money.
Characteristics
1;Adopt unique rubber formula, corrosion resistance, wear resistance, resistance to pressure.
2;Valve replacement parts rubber hose. Simply replace the hose, the valve is in good as new.
3;Absolute seal. Mechanical parts of the valve are protected, only rubber and access to the processing medium, integral flange, do not need to seal, no seal, there is absolutely no problem.
3;Cold resistant performance is good. Due to the fluid flow in the elastic rubber hose, which excludes the frost crack caused by the fluid crystallization shell, etc.
4. Selected according to different fluid hose manufactured by different technics, the applicable scope is wide, classified as type A, type B, C three kinds.
5;Working pressure is less than 1.0 MPa, in the presence of negative pressure in the process use special manufacture of rubber hose in the system.
Structural sketch and size of pneumatic pinch valve
Product display
Company Introduction
| Name | PINCH VALVE |
| Size | DN15-DN600;1/2"-24" |
| Normal pressure | PN10, PN16, 150LB, 10K |
| Design standard | Q/JBGN02, GB 12239 |
| Face to Face Dimension | Q/JBGN02, GB12221-89, QY 2000-2 |
| Flanged Dimension | JB78, GB4126, ANSI B16.5, DIN3202, JIS |
| Inspect & Test | BS 6755, GB/T13927 |
| Body material | Ductile Iron,casting steel, stainless steel |
| Sleeve material | Natural rubber, EPDM, NBR, FPM, IIR |
| Suitable temperature | ≤80°C |
| Application | Slurry, Ore pulp, Abrasive, Dry and Wet type dust, Solid liquid and corrosive medium. |
| Acidic environment | NACE MR0175 |
| Operation | Hand Operated,Gear Operated, Electrical Actuated, Pheumatic Actuated |
Pinch valve (valve) is the introduction of domestic and foreign advanced technology absorption valve of the advantages of the development of a new type of valve, popularity due to its excellent wear resistance, suitable for low pressure pipeline particle slurry or chemical medium conveying control system. Pipe clamp valve open is convenient and flexible, sealed performance is good, put an end to the occurrence of the phenomenon such as PaoMaoDiLou, hose can be replaced periodically, and the body can use for a long time, save money.
Characteristics
1;Adopt unique rubber formula, corrosion resistance, wear resistance, resistance to pressure.
2;Valve replacement parts rubber hose. Simply replace the hose, the valve is in good as new.
3;Absolute seal. Mechanical parts of the valve are protected, only rubber and access to the processing medium, integral flange, do not need to seal, no seal, there is absolutely no problem.
3;Cold resistant performance is good. Due to the fluid flow in the elastic rubber hose, which excludes the frost crack caused by the fluid crystallization shell, etc.
4. Selected according to different fluid hose manufactured by different technics, the applicable scope is wide, classified as type A, type B, C three kinds.
5;Working pressure is less than 1.0 MPa, in the presence of negative pressure in the process use special manufacture of rubber hose in the system.
Structural sketch and size of pneumatic pinch valve
Product display
Company Introduction
