SF014, SF019
Split Plain Bearing
Oil-Lubricated Bearing
Aero Dynamic Bearing
Self-Lubrication
Radial
Oil-Lubrication
Thin Film Lubrication
Shock Absorber of Automobiles and Motorcycles
Available
Wear Resistant
Self-Lubricated
Machinery
Standard Export Packing
ISO
China
848330009
Product Description
SF014,SF019 Shock Absorber Self-lubricating bearing
It is developed according to reciprocating motion of shock absorber and high pressure in flank.It can offer low friction coefficient and good anti-abrasion ,be used in semi-dry condition,The product is applied to shock absorber of automobiles,motorcycles and pneumatic cylmder.
Note:SF019without lead
Availability:
Cylindrical bushes,flanged bushes,thrust wahsers,strip and non-standard parts as the clients supplied drawing and etc.
Tolerance:
Recommended housing bore tolerance is H7,while the shaft diameter tolerance is F7 or H8.
Tech Data:
It is developed according to reciprocating motion of shock absorber and high pressure in flank.It can offer low friction coefficient and good anti-abrasion ,be used in semi-dry condition,The product is applied to shock absorber of automobiles,motorcycles and pneumatic cylmder.
Note:SF019without lead
Availability:
Cylindrical bushes,flanged bushes,thrust wahsers,strip and non-standard parts as the clients supplied drawing and etc.
Tolerance:
Recommended housing bore tolerance is H7,while the shaft diameter tolerance is F7 or H8.
Tech Data:
| Max load capacity P(Dynamic) 140N/mm2,Maximum PV value (Dry) 3.6N/mm2.m/s |
| Max load capacity P(Static)250N/mm2 Maximum PV value(Oil)50N/mm2.m/s |
| Max line speed V(Dry) 2.5m/s Working temperature -200C~+280C |
| Max line speed V(Oil) 5m/s Thermal conductivity 40W/(m.k) Friction coef 0.08~0.20 Coefficient of linear expansion 12*10-6/k |
bronze bushing is made of bronze base, sinter with bronze powder and PTFE layer with filling material of anti-high temperature.
It has high safety factor,and is particularly appropriate for high temperature environment where no oil is efficient and where the machine must be under successive long period working condition.
This is widely used in steel metallurgy industry such as bushes for roller grooves of successive casting machines.cement grouting pumps and screw type converters for cement.
It can also be composed in steel housing or fabricated into flange bushes which both outer surface and inside bore can be used
as working surface.
