XGPT-G90
9002-84-0
(C2f4)N
204-126-9
Polytetrafluoroethylene
Specialty Plastics
Thermosetting Plastic
Casting Plastic
White
XIANGU
20kg Drum
80-120micron
China
3904610000
Product Description
Ball Valve Sealing Material PTFE/Seal Material Medium Particle Size PTFE F4 Powder
Polytetrafluoroethylene PTFE commonly known as "non-stick coating" or "easy to clean materials." The material has acid and alkali resistance, anti-organic solvent properties, almost insoluble in all solvents. At the same time, Teflon has a high temperature characteristics, the friction coefficient is very low.This model of PTFE is a kind of Polytetrafluoroethylene Ultrafine Powder.Mainly used in the manufacturing of molding big panel,plate,and turning film.electrical insulation films,capacitor films and films with high reliability requirements.
SPECIFICATIONS:
APPLICATION FIELDS:
PTFE tube,rod,plate and seal material.Generally press molding at normal temperature by molding press machine,then sinter molding at about 285-350 degrees.
STORAGE:
The PTFE powder should be stored in a cool and dry place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
PACKAGING:
PRODUCT DETAIL IMAGES:
Polytetrafluoroethylene PTFE commonly known as "non-stick coating" or "easy to clean materials." The material has acid and alkali resistance, anti-organic solvent properties, almost insoluble in all solvents. At the same time, Teflon has a high temperature characteristics, the friction coefficient is very low.This model of PTFE is a kind of Polytetrafluoroethylene Ultrafine Powder.Mainly used in the manufacturing of molding big panel,plate,and turning film.electrical insulation films,capacitor films and films with high reliability requirements.
SPECIFICATIONS:
| Model: | XGPT-G90 |
| Surface: | white powder |
| Particle size(μm): | 80~120 |
| Bulk density(g/l): | 400~600 |
| Density(g/cm3): | 2.13~2.18 |
| Tensile strength(Mpa): | ≥25.5 |
| Elongation(%): | ≥250 |
| Moisture(%): | ≤0.04 |
| Melting point( ºC): | 322~332 |
| Thermal instablity index | ≤50 |
APPLICATION FIELDS:
PTFE tube,rod,plate and seal material.Generally press molding at normal temperature by molding press machine,then sinter molding at about 285-350 degrees.
STORAGE:
The PTFE powder should be stored in a cool and dry place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
PACKAGING:
PRODUCT DETAIL IMAGES:
