Scott Internal Bond Test equipment
This is Scott Internal Bond Test equipment.
The Scott Internal Bond Test equipment is designed to determine the internal bond strength of a variety of paper and board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impacet measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allow five specimens to be accurately prepared simultaneously.
1) Selectable units(ft.lb/in2, J/m2.)
2) Report printout with built-in printer
3) Automatic calibration
Newsprint, Fine paper, Liner board, Bookstock, Carton board, Medium, Coatings, Laminates.
TAPPI T 569 and GB/T 262034.
| ITEM | SPECIFICATION |
| POWER: | AC 220V 50HZ |
| Test angle: | 90° |
| Results directly in: | lb-ft/in², J/M2 |
| Ranges: | A: 20-500J/M2, B: 500~1000J/M2 |
| Dimensions(WxDxH): | 70cm×34.5cm×63cm 92KG |
